Job Summary
The employees occupying the positions of this class are responsible for performing and resolving technical and complex civil engineering tasks and problems within the framework of broad engineering and administrative guidelines within transportation. The Engineer I is an entry level engineer position in the Public Works Department. These employees operate from an office or in the field performing work under the supervision of an administrative supervisor. This is the first step in a career progression that continues to the Engineer II position and the Engineer III position. Engineer II employees work on more complex engineering tasks with less supervision and Engineer III employees manage the most complex engineering projects and are Certified Professional Engineers. The Engineer II position is the second step in a career progression that begins with Engineer I and ends with Engineer III. Engineer II employees perform tasks with limited supervision and require substantial use of independent judgment within the scope of advanced engineering assignments. Engineer I employees perform basic engineer work under the supervision of an administrative supervisor. Engineer III employees manage the more technical engineering projects and are Certified Professional Engineers. This transportation professional role is responsible for the review of land use and development engineering applications, plans, and reports for transportation concurrency, street and road standards. This position will be responsible to prepare transportation staff findings and presentations to the County hearings examiner regarding the required public improvements. Engineer positions are represented by PROTEC17, Professional and Technical Employees. For remote work, employees must in live in Washington or Oregon only, no exceptions.
Qualifications
Engineer I
Education and Experience:
• B.S. degree in Civil or related engineering.
- OR -
• High School Diploma or G.E.D. and two (2) years relative engineering work experience and possession of an E.I.T. certification.
Knowledge of: engineering principles, practices and the techniques and equipment involved; physical (hydraulics, mechanics, etc.) and mathematical (trigonometry, calculus, geometry, etc.) sciences and their application to engineering and field surveying computations and engineering design; construction materials, material testing and application; basic principles of supervision.
Ability to: understand and resolve engineering problems and to adapt approved engineering methods and standards to the planning, design and construction of a variety of public works projects; perform technical research work and to give reliable advice on routine engineering problems; draft maps and detailed working drawings, interpret plans and specifications and to become familiar with engineering standards; perform technical computations, to run quality tests, to make estimates and to compile engineering data and statistics; establish and maintain effective relationships with other engineering and surveying personnel, contractors, and the public; express ideas effectively, orally and in writing; understand Department policies and procedures as well as work standards and codes applicable to the job; obtain a valid (Washington State) drivers license at time of hire; use and care for the instruments and equipment employed on various assignments (survey, drafting, etc.).
Engineer II
Education and Experience:
• B.S. degree in Civil or related Engineering and two (2) years experience in an Engineering I classification or equivalent.
- OR -
• High School diploma or G.E.D. and four (4) years relative engineering work experience to include a minimum of two (2) years experience in an Engineering I classification or equivalent and possession of an E.I.T. certification.
- AND -
• Possess or be able to obtain a valid driver's license by date of appointment
Knowledge of: mathematics through trigonometry and its application to field surveying and engineering computations; construction materials sampling and testing in the field and laboratory and of survey equipment and techniques; engineering principles and practices and of the physical sciences (hydraulics, mechanics, etc.) involved; modern engineering methods and techniques as related to construction and maintenance of public works and public utilities; principles of effective supervision; the application and interpretation of the County regulatory codes; Departmental Policies and procedures, work standards and codes applicable to the job.
Ability to: adapt approved engineering methods and standards to the planning, design and construction of a variety of public works projects; read and interpret difficult plans and specifications and to become familiar with engineering standards; perform technical research work and to give reliable advice on difficult engineering problems; prepare engineering records and to write concise technical reports; draft, interpret and utilize engineering plans, maps, specifications and reports; make involved and difficult engineering computations, to design difficult and complex major engineering projects, and to prepare complete engineering plans and specifications; supervise and coordinate the work of other engineers, Engineer Technicians, subordinates and trades personnel; effectively manage resources dedicated to specific projects; to establish and maintain effective relationships with other engineering and surveying personnel, contractors, and the public; speak effectively in public; acquire knowledge of Clark County building codes and zoning regulations and Clark County comprehensive plans, shoreline management regulations and the SEPA state guidelines; obtain a valid Washington State drivers license at time of hire.
SELECTION PROCESS:
Resume and other documents must be attached together in the 'Resume Upload' section of the application. Multiple files are allowed, but all applicant attachments must be uploaded simultaneously, as there is no way to edit or append uploaded materials after submitting the application.
Application Review (Pass/ Fail) - An online application is required. Attaching a resume does not substitute for a completed application; incomplete applications will not pass the application review. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Practical Exam (Pass/Fail) - This recruitment may require a practical exam which will be job related and may include, but not limited to, the qualifications outlined in the job announcement. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Oral Interview - The interview will be job related and may include, not limited to, the qualifications outlined in the job announcement. Top candidate(s) will continue in the process.
Employment references will be conducted for the final candidates and may include verification of education.
It is general policy of the County that new employees should be hired at the lower steps of the applicable range and advance through the range at the normal progression.
First Review date April 24th 2024. This recruitment may close on or after review date.
Examples of Duties
Key Tasks as an Engineer I
Designs and prepares engineering plans and specifications on assigned portions of road, drainage control, transportation and other related Public Works development projects. Develops designs on smaller less complex projects and draws preliminary and finished working drawings of construction design or mapping projects.
Reviews less difficult design plans and specifications for conformance to job requirements. Checks technical content on specialized contract provisions and estimates for road building or paving and develops less difficult special provisions and construction estimates.
Calculates and verifies grade lines, center lines, site distances, economical depths for cuts and fills, sloping, intersections, pipe capacities, service areas, drainage parameters and similar criteria.
Conducts and interprets analyses relative to the economics on portions of proposed engineering designs or policies or on the general effectiveness of existing designs or policies.
Utilizes the computer as an aid to analyzing and developing solutions to engineering problems.
As part of a survey party, operates proficiently all types of survey instruments; takes, checks and makes accurate sketches and computations from field survey notes; is responsible for proper placement of centerline cross section and staking assignments.
Serves as inspector in charge of one or more phases of construction, such as bridges, culverts, drainage systems, sewage systems or road building or improvement projects where problems expected on the projects can be resolved by application of standard or precedent engineering practice; measures, computes or estimates work progress as a basis for payments.
Assures compliance (through sampling and testing) with construction specifications such as proper cribbing of excavation; pouring of seals; strength of concrete; type, size, location and spacing of reinforcing steel; quality of materials; positioning of pipe; compaction of fills and sub-grades, depth, location and smoothness of pavements.
Prepares a variety of engineering research and administrative materials, and develops correspondence, records, and comprehensive reports in support of engineering projects.
Assists general public by answering questions and making referrals relative to a variety of Public Works issues. • Performs other related duties as assigned.
Key Tasks as an Engineer II
Designs, prepares and coordinates the development of construction engineering plans and specifications on all (as a project manager) or portions of (as a team member) major road, bridge, sewer and drainage, or traffic signal and transportation improvement projects; determines intersection, box culvert, pump station and similar designs. Develops cost estimates and recommendations towards final cost estimates.
Directs and participates in the development of detailed construction drawings, topographical profiles and related maps and specification sheets used in Public Works design projects planning and construction.
Reviews move difficult design plans and specifications for conformance to job requirements. Develops and checks more difficult specialized contract provisions, design agreements and design calculations and may attend pre-bid and pre-construction conferences to outline principle construction features.
Computes more difficult mathematical calculations used in developing profile, cross-sections, etc. Plots, profiles and cross-sections, figures grade lines, calculates plots and calculates traverses and similar criteria. Establishes points and elevations, proper location and drainage for streets, sewers, runways and other like structures.
Conducts studies and analyses on suitability of existing structural facilities and general policies, and feasibility (economic, realistic) of proposed designs. Interprets results and makes recommendations, both short and long term, relative to the subject assigned. Utilizes the computer as an aid to analyzing and developing solutions to engineering problems.
Reviews and coordinates the preparation and use of traffic signs; prepares plans and drawings for other traffic control devices; develops and analyses results of traffic engineering studies.
Checks street plans and profiles of short plats and sub-divisions in order to assure conformance to standards of the American Public Works Association and State Department of Transportation, County ordinances and Commissioner requirements; prepares Engineer's reports relative to design deficiencies and recommends the proper corrective action in obtaining compliance. May represent Public Works at public hearings.
Reviews development plans for sewer and storm drainage for compliance with County Standards. Prepares staff reports with respect to utilities for proposed developments. May represent Public Works Department at public hearings for proposed developments. Designs and coordinates sewer and drainage improvement projects. Prepares summaries of design deficiencies and recommends the proper corrective action.
Explains and interprets agreements to contractors; enters "as-built" information to office plans. Evaluates partial stage completion and recommends payments. Prepares construction reports for matching funds and cooperative contracts with federal, state and city governments.
Inspects and leads the inspection of the construction of public works projects; reviews plans and specifications for contract construction work; observes the work of the contractor and verifies that it conforms to plans and specifications; checks material quantities and quality; reviews reports of tests and inspections made by subordinate inspectors; prepares and reviews the preparation of monthly cost and progress estimates, other engineering data and final reports upon the completion of construction jobs.
Instructs field crews engaged in taking soil samples and making field and laboratory tests of soil conditions and characteristics; prepares soil profiles in connection with highway location and construction jobs; prepares reports of soil investigations and analysis for use in the location and design of highways and highway structures.
Checks contract plans against PS&E data; performs physical testing of concrete and reinforcing bars, pre-stress strand and other materials.
Assists in quality control review and analysis; maintains records of progress sampling; reviews test reports for completeness and accuracy.
Directs a survey party ensuring good survey practices are used and is responsible for the accuracy, completeness and efficient functioning of the group. Maintains field books; reads and interprets grade sheets and other construction plans to determine locations for stakes to be set, the number and type to be used and when they should be placed; decides what control points will be tied into; develops the general work schedule for the party; and directs the training of subordinate personnel.
Instructs subordinates engaged in the computation of survey field notes and the preparation of topographic and contour maps, plans, profiles, cross-sections, mass diagrams and other data; personally, does the more difficult computations and engineering drafting and reviews the computations, drawings and mapping of subordinates; prepares estimates of materials and earthwork quantities and costs for construction and maintenance of structures; prepares and checks property descriptions.
Assists general public by answering questions and making referrals relative to special use permits, road improvements and developments, both in the office and at neighborhood meetings; explains requirements of special use permit process, developments and road improvement districts and methods of establishing or obtaining them; maintains close coordination between parties involved (citizens, Commissioners, other Public Works officials) from beginning to end of project.
Prepares applicable resolutions and documents for developments and RID's; may represent Public Works Department at public hearings relative to formation and completion of developments and RID's; conducts and certifies elections for the formation of a RID when the RID is initiated by the Board of Commissioners; reviews petitions for RID by residents to assure legality of signatures; prepares legal descriptions and deeds necessary to convey right of-way in a RID; researches titles on properties in the RID Office, information on right of ways, and corner monumentation.
Assists Prosecuting Attorney in preparation of bond sale for RID financing; prepares informational pamphlets and procedure manuals.
Prepares more difficult and administrative reports, develops correspondence, records, and comprehensive reports as assigned in support of engineering projects.
Performs other related duties as assigned
Salary Grade
Local 17 Engineers.11 - Local 17 Engineers.12
Salary Range
$36.00 - $52.85- per hour
For complete job announcement, application requirements, and to apply on-line (applications on external sites are not monitored), please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Apr 12, 2024
Full time
Job Summary
The employees occupying the positions of this class are responsible for performing and resolving technical and complex civil engineering tasks and problems within the framework of broad engineering and administrative guidelines within transportation. The Engineer I is an entry level engineer position in the Public Works Department. These employees operate from an office or in the field performing work under the supervision of an administrative supervisor. This is the first step in a career progression that continues to the Engineer II position and the Engineer III position. Engineer II employees work on more complex engineering tasks with less supervision and Engineer III employees manage the most complex engineering projects and are Certified Professional Engineers. The Engineer II position is the second step in a career progression that begins with Engineer I and ends with Engineer III. Engineer II employees perform tasks with limited supervision and require substantial use of independent judgment within the scope of advanced engineering assignments. Engineer I employees perform basic engineer work under the supervision of an administrative supervisor. Engineer III employees manage the more technical engineering projects and are Certified Professional Engineers. This transportation professional role is responsible for the review of land use and development engineering applications, plans, and reports for transportation concurrency, street and road standards. This position will be responsible to prepare transportation staff findings and presentations to the County hearings examiner regarding the required public improvements. Engineer positions are represented by PROTEC17, Professional and Technical Employees. For remote work, employees must in live in Washington or Oregon only, no exceptions.
Qualifications
Engineer I
Education and Experience:
• B.S. degree in Civil or related engineering.
- OR -
• High School Diploma or G.E.D. and two (2) years relative engineering work experience and possession of an E.I.T. certification.
Knowledge of: engineering principles, practices and the techniques and equipment involved; physical (hydraulics, mechanics, etc.) and mathematical (trigonometry, calculus, geometry, etc.) sciences and their application to engineering and field surveying computations and engineering design; construction materials, material testing and application; basic principles of supervision.
Ability to: understand and resolve engineering problems and to adapt approved engineering methods and standards to the planning, design and construction of a variety of public works projects; perform technical research work and to give reliable advice on routine engineering problems; draft maps and detailed working drawings, interpret plans and specifications and to become familiar with engineering standards; perform technical computations, to run quality tests, to make estimates and to compile engineering data and statistics; establish and maintain effective relationships with other engineering and surveying personnel, contractors, and the public; express ideas effectively, orally and in writing; understand Department policies and procedures as well as work standards and codes applicable to the job; obtain a valid (Washington State) drivers license at time of hire; use and care for the instruments and equipment employed on various assignments (survey, drafting, etc.).
Engineer II
Education and Experience:
• B.S. degree in Civil or related Engineering and two (2) years experience in an Engineering I classification or equivalent.
- OR -
• High School diploma or G.E.D. and four (4) years relative engineering work experience to include a minimum of two (2) years experience in an Engineering I classification or equivalent and possession of an E.I.T. certification.
- AND -
• Possess or be able to obtain a valid driver's license by date of appointment
Knowledge of: mathematics through trigonometry and its application to field surveying and engineering computations; construction materials sampling and testing in the field and laboratory and of survey equipment and techniques; engineering principles and practices and of the physical sciences (hydraulics, mechanics, etc.) involved; modern engineering methods and techniques as related to construction and maintenance of public works and public utilities; principles of effective supervision; the application and interpretation of the County regulatory codes; Departmental Policies and procedures, work standards and codes applicable to the job.
Ability to: adapt approved engineering methods and standards to the planning, design and construction of a variety of public works projects; read and interpret difficult plans and specifications and to become familiar with engineering standards; perform technical research work and to give reliable advice on difficult engineering problems; prepare engineering records and to write concise technical reports; draft, interpret and utilize engineering plans, maps, specifications and reports; make involved and difficult engineering computations, to design difficult and complex major engineering projects, and to prepare complete engineering plans and specifications; supervise and coordinate the work of other engineers, Engineer Technicians, subordinates and trades personnel; effectively manage resources dedicated to specific projects; to establish and maintain effective relationships with other engineering and surveying personnel, contractors, and the public; speak effectively in public; acquire knowledge of Clark County building codes and zoning regulations and Clark County comprehensive plans, shoreline management regulations and the SEPA state guidelines; obtain a valid Washington State drivers license at time of hire.
SELECTION PROCESS:
Resume and other documents must be attached together in the 'Resume Upload' section of the application. Multiple files are allowed, but all applicant attachments must be uploaded simultaneously, as there is no way to edit or append uploaded materials after submitting the application.
Application Review (Pass/ Fail) - An online application is required. Attaching a resume does not substitute for a completed application; incomplete applications will not pass the application review. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Practical Exam (Pass/Fail) - This recruitment may require a practical exam which will be job related and may include, but not limited to, the qualifications outlined in the job announcement. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Oral Interview - The interview will be job related and may include, not limited to, the qualifications outlined in the job announcement. Top candidate(s) will continue in the process.
Employment references will be conducted for the final candidates and may include verification of education.
It is general policy of the County that new employees should be hired at the lower steps of the applicable range and advance through the range at the normal progression.
First Review date April 24th 2024. This recruitment may close on or after review date.
Examples of Duties
Key Tasks as an Engineer I
Designs and prepares engineering plans and specifications on assigned portions of road, drainage control, transportation and other related Public Works development projects. Develops designs on smaller less complex projects and draws preliminary and finished working drawings of construction design or mapping projects.
Reviews less difficult design plans and specifications for conformance to job requirements. Checks technical content on specialized contract provisions and estimates for road building or paving and develops less difficult special provisions and construction estimates.
Calculates and verifies grade lines, center lines, site distances, economical depths for cuts and fills, sloping, intersections, pipe capacities, service areas, drainage parameters and similar criteria.
Conducts and interprets analyses relative to the economics on portions of proposed engineering designs or policies or on the general effectiveness of existing designs or policies.
Utilizes the computer as an aid to analyzing and developing solutions to engineering problems.
As part of a survey party, operates proficiently all types of survey instruments; takes, checks and makes accurate sketches and computations from field survey notes; is responsible for proper placement of centerline cross section and staking assignments.
Serves as inspector in charge of one or more phases of construction, such as bridges, culverts, drainage systems, sewage systems or road building or improvement projects where problems expected on the projects can be resolved by application of standard or precedent engineering practice; measures, computes or estimates work progress as a basis for payments.
Assures compliance (through sampling and testing) with construction specifications such as proper cribbing of excavation; pouring of seals; strength of concrete; type, size, location and spacing of reinforcing steel; quality of materials; positioning of pipe; compaction of fills and sub-grades, depth, location and smoothness of pavements.
Prepares a variety of engineering research and administrative materials, and develops correspondence, records, and comprehensive reports in support of engineering projects.
Assists general public by answering questions and making referrals relative to a variety of Public Works issues. • Performs other related duties as assigned.
Key Tasks as an Engineer II
Designs, prepares and coordinates the development of construction engineering plans and specifications on all (as a project manager) or portions of (as a team member) major road, bridge, sewer and drainage, or traffic signal and transportation improvement projects; determines intersection, box culvert, pump station and similar designs. Develops cost estimates and recommendations towards final cost estimates.
Directs and participates in the development of detailed construction drawings, topographical profiles and related maps and specification sheets used in Public Works design projects planning and construction.
Reviews move difficult design plans and specifications for conformance to job requirements. Develops and checks more difficult specialized contract provisions, design agreements and design calculations and may attend pre-bid and pre-construction conferences to outline principle construction features.
Computes more difficult mathematical calculations used in developing profile, cross-sections, etc. Plots, profiles and cross-sections, figures grade lines, calculates plots and calculates traverses and similar criteria. Establishes points and elevations, proper location and drainage for streets, sewers, runways and other like structures.
Conducts studies and analyses on suitability of existing structural facilities and general policies, and feasibility (economic, realistic) of proposed designs. Interprets results and makes recommendations, both short and long term, relative to the subject assigned. Utilizes the computer as an aid to analyzing and developing solutions to engineering problems.
Reviews and coordinates the preparation and use of traffic signs; prepares plans and drawings for other traffic control devices; develops and analyses results of traffic engineering studies.
Checks street plans and profiles of short plats and sub-divisions in order to assure conformance to standards of the American Public Works Association and State Department of Transportation, County ordinances and Commissioner requirements; prepares Engineer's reports relative to design deficiencies and recommends the proper corrective action in obtaining compliance. May represent Public Works at public hearings.
Reviews development plans for sewer and storm drainage for compliance with County Standards. Prepares staff reports with respect to utilities for proposed developments. May represent Public Works Department at public hearings for proposed developments. Designs and coordinates sewer and drainage improvement projects. Prepares summaries of design deficiencies and recommends the proper corrective action.
Explains and interprets agreements to contractors; enters "as-built" information to office plans. Evaluates partial stage completion and recommends payments. Prepares construction reports for matching funds and cooperative contracts with federal, state and city governments.
Inspects and leads the inspection of the construction of public works projects; reviews plans and specifications for contract construction work; observes the work of the contractor and verifies that it conforms to plans and specifications; checks material quantities and quality; reviews reports of tests and inspections made by subordinate inspectors; prepares and reviews the preparation of monthly cost and progress estimates, other engineering data and final reports upon the completion of construction jobs.
Instructs field crews engaged in taking soil samples and making field and laboratory tests of soil conditions and characteristics; prepares soil profiles in connection with highway location and construction jobs; prepares reports of soil investigations and analysis for use in the location and design of highways and highway structures.
Checks contract plans against PS&E data; performs physical testing of concrete and reinforcing bars, pre-stress strand and other materials.
Assists in quality control review and analysis; maintains records of progress sampling; reviews test reports for completeness and accuracy.
Directs a survey party ensuring good survey practices are used and is responsible for the accuracy, completeness and efficient functioning of the group. Maintains field books; reads and interprets grade sheets and other construction plans to determine locations for stakes to be set, the number and type to be used and when they should be placed; decides what control points will be tied into; develops the general work schedule for the party; and directs the training of subordinate personnel.
Instructs subordinates engaged in the computation of survey field notes and the preparation of topographic and contour maps, plans, profiles, cross-sections, mass diagrams and other data; personally, does the more difficult computations and engineering drafting and reviews the computations, drawings and mapping of subordinates; prepares estimates of materials and earthwork quantities and costs for construction and maintenance of structures; prepares and checks property descriptions.
Assists general public by answering questions and making referrals relative to special use permits, road improvements and developments, both in the office and at neighborhood meetings; explains requirements of special use permit process, developments and road improvement districts and methods of establishing or obtaining them; maintains close coordination between parties involved (citizens, Commissioners, other Public Works officials) from beginning to end of project.
Prepares applicable resolutions and documents for developments and RID's; may represent Public Works Department at public hearings relative to formation and completion of developments and RID's; conducts and certifies elections for the formation of a RID when the RID is initiated by the Board of Commissioners; reviews petitions for RID by residents to assure legality of signatures; prepares legal descriptions and deeds necessary to convey right of-way in a RID; researches titles on properties in the RID Office, information on right of ways, and corner monumentation.
Assists Prosecuting Attorney in preparation of bond sale for RID financing; prepares informational pamphlets and procedure manuals.
Prepares more difficult and administrative reports, develops correspondence, records, and comprehensive reports as assigned in support of engineering projects.
Performs other related duties as assigned
Salary Grade
Local 17 Engineers.11 - Local 17 Engineers.12
Salary Range
$36.00 - $52.85- per hour
For complete job announcement, application requirements, and to apply on-line (applications on external sites are not monitored), please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Job Information
Are you looking for a meaningful career that has a positive impact on the community ? If you answered YES , come join the City of Sparks! Aside from working for an organization that is dedicated to the community, you will also receive a generous and competitive salary, benefit package, tuition reimbursement, bilingual pay (when applicable) and retirement plan . People who come to Sparks stay in Sparks.
Application Tips :
Fill out and update your general online application before attaching it to any new job posting. HR reviews information listed on the application submitted to the specific job posting.
Contact information : use an email address you can easily access at any time.
The Qualifications section below is your guide to understand what the City is looking for on your application, use this to your advantage. It is up to the candidate seeking employment/promotion to include all relevant information for qualification purposes, on the application the candidate submits to be considered for the job.
DO attach: licenses/transcripts/certificates that will demonstrate you meet the education or certification requirements (see qualifications section to determine what documents to attach) or preferred experience/education.
DO NOT attach resumes or cover letters . The City of Sparks does not review these items with the application.
Enable TEXT messaging in your application before you hit submit! This feature will allow the recruiter to send you important reminders throughout the recruitment process.
The City of Sparks is currently seeking to hire one (1) Equipment Mechanic in the Public Works Division of the Community Services Department.
If you have any questions, please email hrstaff@cityofsparks.us. The City of Sparks is an Equal Opportunity Employer.
Civil Service Testing :
The Civil Service Examination for this position will be a written exam conducted in-person at the City of Sparks' City Hall Building, located at 431 Prater Way, Sparks, NV on Wednesday, May 15, 2024. Please note that this is the only date currently scheduled for testing, additional dates may be considered depending on department availability and need . If you have questions about testing, please email hrstaff@cityofsparks.us. Qualified applicants will be notified of testing specifics, including time and meeting room.
For this exam, the testing agency has provided a source list for candidates to prepare. Please see below for preparation material information:
Duffy. (2014). Modern Automotive Technology, 8th Edition. Goodheart-Wilcon Publisher.
If you are unable to purchase the preparation materials, please note that Human Resources has limited access and can provide in-person access on a first come first served basis. Materials and staff time are limited. To secure a study time, please email hrstaff@cityofsparks.us as soon as possible. Usage of testing preparation materials from the City of Sparks is only allowed through Human Resources Office. Therefore, materials cannot be checked out and must be reviewed in-person.
EQUIPMENT MECHANIC I
DESCRIPTION
Under general supervision perform maintenance, repair and service to a variety of equipment and vehicles used by the City.
DISTINGUISHING CHARACTERISTICS
This is the entry level class in the Equipment Mechanic series, expected to perform assigned maintenance and repair duties under general supervision.
EQUIPMENT MECHANIC II DESCRIPTION
Perform highly skilled maintenance, repair, and overhaul a variety of equipment and vehicles used by the City.
DISTINGUISHING CHARACTERISTICS
This is the journey level class in the Equipment Mechanic series, expected to perform the full range of essential functions with limited supervision.
Qualifications
Applicants must possess the following minimum qualifications to continue in the recruitment process:
EQUIPMENT MECHANIC I Education and Experience:
High School Diploma or equivalent and two (2) years of experience in the repair of gasoline and diesel-powered vehicles and related equipment in a commercial fleet or City fleet setting.
Licenses and Certificates:
Must possess within thirty (30) days of hire and maintain throughout employment, the equivalent to a valid Nevada Class C driver's license.
Must possess within thirty (30) days of hire and maintain throughout employment, a forklift certification.
Must possess within six (6) months of hire and maintain throughout employment, a valid Nevada Class A CDL driver's license with tanker and combination vehicle endorsements.
Must possess within ninety (90) days of hire and maintain throughout employment, a valid 1G emissions testing certification from the State of Nevada.
Must possess within one (1) year of hire and maintain throughout employment, a valid 2G emissions test and repair certification from the State of Nevada.
Must possess within one (1) year of hire and maintain throughout employment, an ASE Master certificate.
EQUIPMENT MECHANIC II Education and Experience:
High School Diploma or equivalent and four (4) years of experience in the repair of gasoline and diesel-powered vehicles and related equipment in a commercial fleet or City fleet setting equivalent to the City’s class of Equipment Mechanic I.
Licenses and Certificates:
Must possess within thirty (30) days of hire and maintain throughout employment, the equivalent to a valid Nevada Class C driver's license.
Must possess within thirty (30) days of hire and maintain throughout employment, a forklift certification.
Must possess within six (6) months of hire and maintain throughout employment, a valid Nevada Class A CDL driver's license with tanker and combination vehicle endorsements.
Must possess within ninety (90) days of hire and maintain throughout employment, a valid 1G emissions testing certification from the State of Nevada.
Must possess within one (1) year of hire and maintain throughout employment, a valid 2G emissions test and repair certification from the State of Nevada.
Must possess within one (1) year of hire and maintain throughout employment, an ASE Master certificate.
Examples of Essential Duties
EQUIPMENT MECHANIC I
Diagnose, repair, clean, adjust and install fuel, ignition, electrical and cooling systems involving repair and replacement of parts such as carburetors, fuel pumps, starter motors, distributors, generators, voltage regulators, wiring, switches, batteries, radiators, thermostats, and water pumps. Observe safe work methods and utilize safety equipment related to work.
Diagnose and repair a wide variety of gasoline and diesel injection systems and engines; trucks and construction equipment; advanced electrical systems; computer systems and modules using DVOM, scan tools and lab scope; power transmission systems including clutches, standard transmissions, auto transmissions and differential units; front and rear axles, gears, bearings, universal joints and hydraulic units.
Diagnose, repair and maintain vehicle air brakes, hydraulic systems and associated power take-off equipment, steering mechanisms, brakes and other controls; and inspect and replace broken or worn parts.
Install electrical and radio systems in vehicles as necessary. Modify systems as required. Maintain and repair solar charging systems.
Operate fabrication equipment such as band saws, chop saws, plasma cutter, drill press, horizontal lathe, metal shear, press brake, tubing bender and tubing notcher. Load and unload trucks and equipment with a forklift.
Road test vehicles, drive trucks or equipment as required. Diagnose and perform electrical, hydraulic and other repairs in the field. Perform smog checks, smog related failure repairs, and certify vehicles.
Perform specialty repairs on Police and Fire equipment, minor repairs to engines and vehicle alignments. Use and perform minor maintenance on hand, power and shop tools and test equipment. Perform preventive maintenance on construction equipment, heavy trucks, street sweepers, automobiles, light trucks and other equipment. Maintain and repair small gasoline engines and equipment found on mowers and chain saws.
Read and interpret manuals, drawings, and specifications. Prepare basic records and reports. Create oral and written reports of work performed. Complete forms and accurately maintain records. Estimate necessary labor, material and equipment to complete assignments and order parts required.
Train others in work knowledge, procedures, skills, and abilities. Perform other duties which may be assigned.
Knowledge, Skills and Abilities:
Knowledge of multiple processes of welding such as: TIG, MIG, stick, dual shield and OXY fuel welding and cutting on different types of material including steel, stainless steel, aluminum, copper, brass, and other alloys
Knowledge of electrical systems and computer systems including 12-24 VDC and 110-220 VAC
Knowledge of safe work methods and safety regulations pertaining to the work
Knowledge of computer applications and software related to the work including but not limited to, Microsoft Office
Ability to understand and follow oral and written instructions
Ability to establish and maintain cooperative and effective relationships with those contacted during work
Ability to exercise sound judgment within general policy guidelines
Ability to train others in work procedures
Physical Demands:
Requires sufficient strength and stamina to perform sustained heavy physical labor for extended periods of time. Requires the ability to: lift and carry equipment weighing up to sixty (60) lbs., safely operate heavy and potentially hazardous tools or equipment, and work outdoors in medians and roadways in varied weather conditions with exposure to heavy traffic and other potential hazards.
SUPPLEMENTAL JOB INFORMATION
This is a Civil Service position and is Non-Exempt under FLSA guidelines
This position reports to a Crew Supervisor and receives work direction from the Equipment Mechanic Lead
Supervision exercised: May provide training to support staff
May be called back, held over, work off-hours, nights, weekends and holiday shifts as required
May be required to work during emergency circumstances or inclement weather conditions
Must possess and maintain a personal set of tools as specified by the City
May be required to pass a pre-placement drug screen and background investigation
EQUIPMENT MECHANIC II
Diagnose, repair, clean, adjust and install fuel, ignition, electrical and cooling systems involving repair and replacement of parts such as carburetors, fuel pumps, starter motors, distributors, generators, voltage regulators, wiring, switches, batteries, radiators, thermostats, and water pumps. Observe safe work methods and utilize safety equipment related to work.
Diagnose, repair and overhaul a wide variety of gasoline and diesel injection systems and engines; trucks and construction equipment; advanced electrical systems; computer systems and modules using DVOM, scan tools and lab scope; power transmission systems including clutches, standard transmissions, auto transmissions, differential units; front and rear axles, gears, bearings, universal joints and hydraulic units.
Diagnose, repair, adjust and maintain vehicle air brakes, hydraulic systems and associated power take-off equipment, steering mechanisms, brakes and other controls; and inspect and replace broken or worn parts.
Install electrical and radio systems in vehicles as necessary. Modify systems as required. Maintain and repair solar charging systems.
Operate fabrication equipment such as band saws, chop saws, plasma cutter, drill press, horizontal lathe, metal shear, press brake, tubing bender and tubing notcher. Load and unload trucks and equipment with a forklift.
Road tests vehicles, drive trucks or equipment as required. Diagnose and perform electrical, hydraulic and other repairs in the field. Perform smog checks, smog related failure repairs and certify vehicles.
Perform specialty repairs on Police and Fire equipment, major repairs and overhauls to engines and vehicle alignments. Use and perform minor maintenance on hand, power and shop tools and test equipment. Perform preventive maintenance and overhaul on construction equipment, heavy trucks, street sweepers, automobiles, light trucks and other equipment. Maintain and repair small gasoline engines and equipment found on mowers and chain saws.
Read and interpret manuals, drawings, and specifications. Prepare basic records and reports. Create oral and written reports of performed work. Complete forms and accurately maintain records. Estimate necessary labor, material, equipment needed to complete assignments and order parts required.
Design and fabricate parts using a variety of materials and multiple welding processes; and repair shop equipment and tools, playground equipment, truck beds, racks, sports equipment, tables, traffic cabinets and any other projects the City has.
Mentor and train others in work knowledge, procedures, skills, and abilities. Perform other duties which may be assigned.
Knowledge, Skills and Abilities:
Knowledge of multiple processes of welding such as: TIG, MIG, stick, dual shield and OXY fuel welding and cutting on different types of material including steel, stainless steel, aluminum, copper, brass and other alloys
Knowledge of electrical systems and computer systems including 12-24 VDC and 110-220 VAC
Knowledge of safe work methods and safety regulations pertaining to the work
Knowledge of computer applications and software related to the work including Microsoft Office
Ability to understand and follow oral and written instructions
Ability to establish and maintain cooperative and effective relationships with those contacted during work
Ability to exercise sound judgment within general policy guidelines
Ability to train others in work procedures
Physical Demands:
Requires sufficient strength and stamina to perform sustained heavy physical labor for extended periods of time. Requires the ability to: lift and carry equipment weighing up to sixty (60) lbs., safely operate heavy and potentially hazardous tools or equipment, and work outdoors in medians and roadways in varied weather conditions with exposure to heavy traffic and other potential hazards.
SUPPLEMENTAL JOB INFORMATION
This is a Civil Service position and is Non-Exempt under FLSA guidelines
This position reports to a Crew Supervisor and receives work direction from the Equipment Mechanic Lead
Supervision exercised: May provide work direction and training to support staff
May be called back, held over, work off-hours, nights, weekends and holiday shifts as required
May be required to work during emergency circumstances or inclement weather conditions
Must possess and maintain a personal set of tools as specified by the City
May be required to pass a pre-placement drug screen and background investigation
Application and Recruitment Information
Human Resources will require prior to the first examination for the position, necessary documentary evidence be submitted for fitness of any qualification. Any requirement not met for the advertised position prior to the first examination for that position, will be cause for Human Resources to decline to examine, certify or hire the applicant. Recruitment Communication: Human Resources will be contacting you at various stages of the recruitment process via email only, even if you have chosen U.S. mail for prior application processes or for applications with other agencies. Please make sure your email address is accurate. Reasonable Accommodation : Human Resources will make efforts to provide reasonable accommodations to disabled candidates in the selection process. If you have special needs, please notify the Human Resources office when you turn in your application or at least three (3) business days prior to the examination/interview by calling (775) 353-2345. Disclaimer : The City of Sparks hires and promotes candidates based on a competitive merit selection process, which may include any or all of the following: screening for minimum qualifications, written examinations, supplemental training and experience questionnaires, assessment centers, interviews (oral or written), physical tests or any combination which the Sparks Civil Service Commission may order. Scoring in the top five (5) for promotion or top ten (10) for entry level in any part of the selection process merely advances the applicant to a higher round of examination, which may consist of additional interviews and other evaluations. Scoring in the top five (5) or ten (10) gives no right to be selected for the position. The City of Sparks reserves the right to select applicants who demonstrate the best combination of qualifications for the position.
Apr 12, 2024
Full time
Job Information
Are you looking for a meaningful career that has a positive impact on the community ? If you answered YES , come join the City of Sparks! Aside from working for an organization that is dedicated to the community, you will also receive a generous and competitive salary, benefit package, tuition reimbursement, bilingual pay (when applicable) and retirement plan . People who come to Sparks stay in Sparks.
Application Tips :
Fill out and update your general online application before attaching it to any new job posting. HR reviews information listed on the application submitted to the specific job posting.
Contact information : use an email address you can easily access at any time.
The Qualifications section below is your guide to understand what the City is looking for on your application, use this to your advantage. It is up to the candidate seeking employment/promotion to include all relevant information for qualification purposes, on the application the candidate submits to be considered for the job.
DO attach: licenses/transcripts/certificates that will demonstrate you meet the education or certification requirements (see qualifications section to determine what documents to attach) or preferred experience/education.
DO NOT attach resumes or cover letters . The City of Sparks does not review these items with the application.
Enable TEXT messaging in your application before you hit submit! This feature will allow the recruiter to send you important reminders throughout the recruitment process.
The City of Sparks is currently seeking to hire one (1) Equipment Mechanic in the Public Works Division of the Community Services Department.
If you have any questions, please email hrstaff@cityofsparks.us. The City of Sparks is an Equal Opportunity Employer.
Civil Service Testing :
The Civil Service Examination for this position will be a written exam conducted in-person at the City of Sparks' City Hall Building, located at 431 Prater Way, Sparks, NV on Wednesday, May 15, 2024. Please note that this is the only date currently scheduled for testing, additional dates may be considered depending on department availability and need . If you have questions about testing, please email hrstaff@cityofsparks.us. Qualified applicants will be notified of testing specifics, including time and meeting room.
For this exam, the testing agency has provided a source list for candidates to prepare. Please see below for preparation material information:
Duffy. (2014). Modern Automotive Technology, 8th Edition. Goodheart-Wilcon Publisher.
If you are unable to purchase the preparation materials, please note that Human Resources has limited access and can provide in-person access on a first come first served basis. Materials and staff time are limited. To secure a study time, please email hrstaff@cityofsparks.us as soon as possible. Usage of testing preparation materials from the City of Sparks is only allowed through Human Resources Office. Therefore, materials cannot be checked out and must be reviewed in-person.
EQUIPMENT MECHANIC I
DESCRIPTION
Under general supervision perform maintenance, repair and service to a variety of equipment and vehicles used by the City.
DISTINGUISHING CHARACTERISTICS
This is the entry level class in the Equipment Mechanic series, expected to perform assigned maintenance and repair duties under general supervision.
EQUIPMENT MECHANIC II DESCRIPTION
Perform highly skilled maintenance, repair, and overhaul a variety of equipment and vehicles used by the City.
DISTINGUISHING CHARACTERISTICS
This is the journey level class in the Equipment Mechanic series, expected to perform the full range of essential functions with limited supervision.
Qualifications
Applicants must possess the following minimum qualifications to continue in the recruitment process:
EQUIPMENT MECHANIC I Education and Experience:
High School Diploma or equivalent and two (2) years of experience in the repair of gasoline and diesel-powered vehicles and related equipment in a commercial fleet or City fleet setting.
Licenses and Certificates:
Must possess within thirty (30) days of hire and maintain throughout employment, the equivalent to a valid Nevada Class C driver's license.
Must possess within thirty (30) days of hire and maintain throughout employment, a forklift certification.
Must possess within six (6) months of hire and maintain throughout employment, a valid Nevada Class A CDL driver's license with tanker and combination vehicle endorsements.
Must possess within ninety (90) days of hire and maintain throughout employment, a valid 1G emissions testing certification from the State of Nevada.
Must possess within one (1) year of hire and maintain throughout employment, a valid 2G emissions test and repair certification from the State of Nevada.
Must possess within one (1) year of hire and maintain throughout employment, an ASE Master certificate.
EQUIPMENT MECHANIC II Education and Experience:
High School Diploma or equivalent and four (4) years of experience in the repair of gasoline and diesel-powered vehicles and related equipment in a commercial fleet or City fleet setting equivalent to the City’s class of Equipment Mechanic I.
Licenses and Certificates:
Must possess within thirty (30) days of hire and maintain throughout employment, the equivalent to a valid Nevada Class C driver's license.
Must possess within thirty (30) days of hire and maintain throughout employment, a forklift certification.
Must possess within six (6) months of hire and maintain throughout employment, a valid Nevada Class A CDL driver's license with tanker and combination vehicle endorsements.
Must possess within ninety (90) days of hire and maintain throughout employment, a valid 1G emissions testing certification from the State of Nevada.
Must possess within one (1) year of hire and maintain throughout employment, a valid 2G emissions test and repair certification from the State of Nevada.
Must possess within one (1) year of hire and maintain throughout employment, an ASE Master certificate.
Examples of Essential Duties
EQUIPMENT MECHANIC I
Diagnose, repair, clean, adjust and install fuel, ignition, electrical and cooling systems involving repair and replacement of parts such as carburetors, fuel pumps, starter motors, distributors, generators, voltage regulators, wiring, switches, batteries, radiators, thermostats, and water pumps. Observe safe work methods and utilize safety equipment related to work.
Diagnose and repair a wide variety of gasoline and diesel injection systems and engines; trucks and construction equipment; advanced electrical systems; computer systems and modules using DVOM, scan tools and lab scope; power transmission systems including clutches, standard transmissions, auto transmissions and differential units; front and rear axles, gears, bearings, universal joints and hydraulic units.
Diagnose, repair and maintain vehicle air brakes, hydraulic systems and associated power take-off equipment, steering mechanisms, brakes and other controls; and inspect and replace broken or worn parts.
Install electrical and radio systems in vehicles as necessary. Modify systems as required. Maintain and repair solar charging systems.
Operate fabrication equipment such as band saws, chop saws, plasma cutter, drill press, horizontal lathe, metal shear, press brake, tubing bender and tubing notcher. Load and unload trucks and equipment with a forklift.
Road test vehicles, drive trucks or equipment as required. Diagnose and perform electrical, hydraulic and other repairs in the field. Perform smog checks, smog related failure repairs, and certify vehicles.
Perform specialty repairs on Police and Fire equipment, minor repairs to engines and vehicle alignments. Use and perform minor maintenance on hand, power and shop tools and test equipment. Perform preventive maintenance on construction equipment, heavy trucks, street sweepers, automobiles, light trucks and other equipment. Maintain and repair small gasoline engines and equipment found on mowers and chain saws.
Read and interpret manuals, drawings, and specifications. Prepare basic records and reports. Create oral and written reports of work performed. Complete forms and accurately maintain records. Estimate necessary labor, material and equipment to complete assignments and order parts required.
Train others in work knowledge, procedures, skills, and abilities. Perform other duties which may be assigned.
Knowledge, Skills and Abilities:
Knowledge of multiple processes of welding such as: TIG, MIG, stick, dual shield and OXY fuel welding and cutting on different types of material including steel, stainless steel, aluminum, copper, brass, and other alloys
Knowledge of electrical systems and computer systems including 12-24 VDC and 110-220 VAC
Knowledge of safe work methods and safety regulations pertaining to the work
Knowledge of computer applications and software related to the work including but not limited to, Microsoft Office
Ability to understand and follow oral and written instructions
Ability to establish and maintain cooperative and effective relationships with those contacted during work
Ability to exercise sound judgment within general policy guidelines
Ability to train others in work procedures
Physical Demands:
Requires sufficient strength and stamina to perform sustained heavy physical labor for extended periods of time. Requires the ability to: lift and carry equipment weighing up to sixty (60) lbs., safely operate heavy and potentially hazardous tools or equipment, and work outdoors in medians and roadways in varied weather conditions with exposure to heavy traffic and other potential hazards.
SUPPLEMENTAL JOB INFORMATION
This is a Civil Service position and is Non-Exempt under FLSA guidelines
This position reports to a Crew Supervisor and receives work direction from the Equipment Mechanic Lead
Supervision exercised: May provide training to support staff
May be called back, held over, work off-hours, nights, weekends and holiday shifts as required
May be required to work during emergency circumstances or inclement weather conditions
Must possess and maintain a personal set of tools as specified by the City
May be required to pass a pre-placement drug screen and background investigation
EQUIPMENT MECHANIC II
Diagnose, repair, clean, adjust and install fuel, ignition, electrical and cooling systems involving repair and replacement of parts such as carburetors, fuel pumps, starter motors, distributors, generators, voltage regulators, wiring, switches, batteries, radiators, thermostats, and water pumps. Observe safe work methods and utilize safety equipment related to work.
Diagnose, repair and overhaul a wide variety of gasoline and diesel injection systems and engines; trucks and construction equipment; advanced electrical systems; computer systems and modules using DVOM, scan tools and lab scope; power transmission systems including clutches, standard transmissions, auto transmissions, differential units; front and rear axles, gears, bearings, universal joints and hydraulic units.
Diagnose, repair, adjust and maintain vehicle air brakes, hydraulic systems and associated power take-off equipment, steering mechanisms, brakes and other controls; and inspect and replace broken or worn parts.
Install electrical and radio systems in vehicles as necessary. Modify systems as required. Maintain and repair solar charging systems.
Operate fabrication equipment such as band saws, chop saws, plasma cutter, drill press, horizontal lathe, metal shear, press brake, tubing bender and tubing notcher. Load and unload trucks and equipment with a forklift.
Road tests vehicles, drive trucks or equipment as required. Diagnose and perform electrical, hydraulic and other repairs in the field. Perform smog checks, smog related failure repairs and certify vehicles.
Perform specialty repairs on Police and Fire equipment, major repairs and overhauls to engines and vehicle alignments. Use and perform minor maintenance on hand, power and shop tools and test equipment. Perform preventive maintenance and overhaul on construction equipment, heavy trucks, street sweepers, automobiles, light trucks and other equipment. Maintain and repair small gasoline engines and equipment found on mowers and chain saws.
Read and interpret manuals, drawings, and specifications. Prepare basic records and reports. Create oral and written reports of performed work. Complete forms and accurately maintain records. Estimate necessary labor, material, equipment needed to complete assignments and order parts required.
Design and fabricate parts using a variety of materials and multiple welding processes; and repair shop equipment and tools, playground equipment, truck beds, racks, sports equipment, tables, traffic cabinets and any other projects the City has.
Mentor and train others in work knowledge, procedures, skills, and abilities. Perform other duties which may be assigned.
Knowledge, Skills and Abilities:
Knowledge of multiple processes of welding such as: TIG, MIG, stick, dual shield and OXY fuel welding and cutting on different types of material including steel, stainless steel, aluminum, copper, brass and other alloys
Knowledge of electrical systems and computer systems including 12-24 VDC and 110-220 VAC
Knowledge of safe work methods and safety regulations pertaining to the work
Knowledge of computer applications and software related to the work including Microsoft Office
Ability to understand and follow oral and written instructions
Ability to establish and maintain cooperative and effective relationships with those contacted during work
Ability to exercise sound judgment within general policy guidelines
Ability to train others in work procedures
Physical Demands:
Requires sufficient strength and stamina to perform sustained heavy physical labor for extended periods of time. Requires the ability to: lift and carry equipment weighing up to sixty (60) lbs., safely operate heavy and potentially hazardous tools or equipment, and work outdoors in medians and roadways in varied weather conditions with exposure to heavy traffic and other potential hazards.
SUPPLEMENTAL JOB INFORMATION
This is a Civil Service position and is Non-Exempt under FLSA guidelines
This position reports to a Crew Supervisor and receives work direction from the Equipment Mechanic Lead
Supervision exercised: May provide work direction and training to support staff
May be called back, held over, work off-hours, nights, weekends and holiday shifts as required
May be required to work during emergency circumstances or inclement weather conditions
Must possess and maintain a personal set of tools as specified by the City
May be required to pass a pre-placement drug screen and background investigation
Application and Recruitment Information
Human Resources will require prior to the first examination for the position, necessary documentary evidence be submitted for fitness of any qualification. Any requirement not met for the advertised position prior to the first examination for that position, will be cause for Human Resources to decline to examine, certify or hire the applicant. Recruitment Communication: Human Resources will be contacting you at various stages of the recruitment process via email only, even if you have chosen U.S. mail for prior application processes or for applications with other agencies. Please make sure your email address is accurate. Reasonable Accommodation : Human Resources will make efforts to provide reasonable accommodations to disabled candidates in the selection process. If you have special needs, please notify the Human Resources office when you turn in your application or at least three (3) business days prior to the examination/interview by calling (775) 353-2345. Disclaimer : The City of Sparks hires and promotes candidates based on a competitive merit selection process, which may include any or all of the following: screening for minimum qualifications, written examinations, supplemental training and experience questionnaires, assessment centers, interviews (oral or written), physical tests or any combination which the Sparks Civil Service Commission may order. Scoring in the top five (5) for promotion or top ten (10) for entry level in any part of the selection process merely advances the applicant to a higher round of examination, which may consist of additional interviews and other evaluations. Scoring in the top five (5) or ten (10) gives no right to be selected for the position. The City of Sparks reserves the right to select applicants who demonstrate the best combination of qualifications for the position.
Project Engineer
Intertek is searching for a Project Engineer to join our Building & Construction team in our Elmendorf, TX office. This is a fantastic opportunity to grow a versatile career in Fire Resistance Group!
The Project Engineer is responsible for:
Reading, understanding, and interpreting standards and test methods for conducting industry test methods on building products and assemblies to evaluate the flame spread and fire-resistance performance, safety characteristics, and compliance to applicable standards. The Project Engineer will be interacting with the Department Manager, fellow technicians, clients, and various internal departments and staff to determine a scope of work and develop projects to completion. In addition, he/she will generate and implement ideas and solutions to ensure safety, reliability, improve quality, reduce cost, and comply with company policies.
Ideal candidates should have proficient computer skills in addition to excellent written & verbal communication skills. Previous construction, installation, and/or firefighting experience is preferred, but not required. An eagerness to learn, strong work ethic, and good work attitude are most important as an applicant.
What you’ll do:·
Test and evaluate various building and construction products in the laboratory for flame spread and fire resistance properties
Research and implement new test methods and procedures
Train new employees and provide support as needed
Take full responsibility for projects (i.e. logistics, testing, reporting, etc.)
Review and thoroughly understand contract requirements and document any deviations
Advise client of extra costs before they are incurred
Coordinate with the project and department managers the test schedule with equipment schedule to optimize efficiency and client satisfaction
Communicate with clients on test preparation, procedures, results, and reporting matters
Prepare and submit accurate and concise reports on all projects assigned
Construction and demolition of mock-up test assemblies and samples
Small, intermediate, and large scale specimen preparation
Other duties as assigned·
What it takes to be successful in this role:
Bachelor's Degree in Engineering or equivalent
General construction experience desired
Knowledge of equipment and tools used in building construction
Excellent problem solving skills and the ability to coordinate and develop multiple projects at one time
Ability to read and interpret technical standards and specifications.
Computer proficiency
Ability to read and understand drawings and build accordingly
Able to follow direction and work independently and in a team environment
Ability to lift, push and/or pull (infrequently) up to 75 lbs.
Must be able to bend down, climb ladders and reach over-head
Ability to work at heights up to 40 feet
Ability to travel based on the needs of the business, some occasional overnight travel may be required
Valid driver’s license and reliable driving record (required)
Apr 10, 2024
Full time
Project Engineer
Intertek is searching for a Project Engineer to join our Building & Construction team in our Elmendorf, TX office. This is a fantastic opportunity to grow a versatile career in Fire Resistance Group!
The Project Engineer is responsible for:
Reading, understanding, and interpreting standards and test methods for conducting industry test methods on building products and assemblies to evaluate the flame spread and fire-resistance performance, safety characteristics, and compliance to applicable standards. The Project Engineer will be interacting with the Department Manager, fellow technicians, clients, and various internal departments and staff to determine a scope of work and develop projects to completion. In addition, he/she will generate and implement ideas and solutions to ensure safety, reliability, improve quality, reduce cost, and comply with company policies.
Ideal candidates should have proficient computer skills in addition to excellent written & verbal communication skills. Previous construction, installation, and/or firefighting experience is preferred, but not required. An eagerness to learn, strong work ethic, and good work attitude are most important as an applicant.
What you’ll do:·
Test and evaluate various building and construction products in the laboratory for flame spread and fire resistance properties
Research and implement new test methods and procedures
Train new employees and provide support as needed
Take full responsibility for projects (i.e. logistics, testing, reporting, etc.)
Review and thoroughly understand contract requirements and document any deviations
Advise client of extra costs before they are incurred
Coordinate with the project and department managers the test schedule with equipment schedule to optimize efficiency and client satisfaction
Communicate with clients on test preparation, procedures, results, and reporting matters
Prepare and submit accurate and concise reports on all projects assigned
Construction and demolition of mock-up test assemblies and samples
Small, intermediate, and large scale specimen preparation
Other duties as assigned·
What it takes to be successful in this role:
Bachelor's Degree in Engineering or equivalent
General construction experience desired
Knowledge of equipment and tools used in building construction
Excellent problem solving skills and the ability to coordinate and develop multiple projects at one time
Ability to read and interpret technical standards and specifications.
Computer proficiency
Ability to read and understand drawings and build accordingly
Able to follow direction and work independently and in a team environment
Ability to lift, push and/or pull (infrequently) up to 75 lbs.
Must be able to bend down, climb ladders and reach over-head
Ability to work at heights up to 40 feet
Ability to travel based on the needs of the business, some occasional overnight travel may be required
Valid driver’s license and reliable driving record (required)
Job Summary
This position diagnoses problems and makes mechanical repairs to all types of equipment used in roadway and parts maintenance and performs vehicular maintenance for all county departments. The Technician at times will be working in the field three or more hours per shift servicing equipment. This is a journey level position requiring experience in welding and fabrication, maintaining gas and diesel truck engines, and hydraulically operated equipment. Major duties include: inspecting, diagnosing, and making repairs to road construction and grounds maintenance equipment and automotive fleet; and designing, modifying, repairing, and installing hydraulic systems and components. This position is represented by Local 1432 – Int’l Association of Machinists and Aerospace Workers.
Qualifications
Education and Experience:
Three (3) years of experience as a journey level equipment/vehicle Technician Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience. Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable.
Must possess a valid motor vehicle operator’s license.
Must possess or be able to obtain a Commercial Drivers License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire.
Experience in welding and fabrication is highly desirable.
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
Selection Process:
Resume and other documents must be attached together in the 'Resume Upload' section of the application. Multiple files are allowed, but all applicant attachments must be uploaded simultaneously, as there is no way to edit or append uploaded materials after submitting the application.
Application Review (Pass/ Fail) - An online application is required. Attaching a resume does not substitute for a completed application; incomplete applications will not pass the application review. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Practical Exam (Pass/Fail) - This recruitment may require a practical exam which will be job related and may include, but not limited to, the qualifications outlined in the job announcement. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Oral Interview - The interview will be job related and may include, not limited to, the qualifications outlined in the job announcement. Top candidate(s) will continue in the process.
Employment references will be conducted for the final candidates and may include verification of education.
It is general policy of the County that new employees should be hired at the lower steps of the applicable range and advance through the range at the normal progression.
Examples of Duties
Duties may include but are not limited to the following:
Inspects, diagnoses and makes repairs to mechanical equipment such as passenger vehicles, back hoes, excavators, graders, dozers, heavy trucks and accessories, snow removal equipment, loaders, rollers, vactor control and all other County-owned equipment used in highway maintenance and construction.
Grinds and seats valves; checks guides for wear and springs for tension and breakage.
Replaces injectors and fuel pump and re-assembles to specifications.
Checks manual and automatic transmissions and replaces bearings, gears and forks if necessary.
Pulls wheels and replaces or repacks wheel bearings and refaces or replaces drums; replaces brake lining and shoes; repairs air cans and checks systems for leaks; repairs air compressors and air governors.
Operates such shop equipment as grinders, AC recovery, vacuum gauge, voltage and regulator tester, wheel balancer, drill press, wheel pullers, lathes, jacks air tools, scope, dwell meter, timing light and various diagnostic hand tools and other equipment used in automotive repairs and diagnoses.
Performs electronic tune-ups and adjustments and uses a variety of diagnostic machines.
Designs, modifies, and installs hydraulic systems and other special accessories to the equipment on hand.
Maintains shop records.
May do some machinist, welder or blacksmith work; may do specialized work, such as body repair and painting.
Road tests vehicles after repair.
Supervises the work of apprentice mechanics.
Perform work as required on boats, outboard motors, out-drives and related marine equipment.
Performs other work as required.
Salary Grade
Local 1432.8
Salary Range
$27.99 - $37.78- per hour
For complete job announcement, application requirements, and to apply on-line (applications on external sites are not monitored), please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Mar 25, 2024
Full time
Job Summary
This position diagnoses problems and makes mechanical repairs to all types of equipment used in roadway and parts maintenance and performs vehicular maintenance for all county departments. The Technician at times will be working in the field three or more hours per shift servicing equipment. This is a journey level position requiring experience in welding and fabrication, maintaining gas and diesel truck engines, and hydraulically operated equipment. Major duties include: inspecting, diagnosing, and making repairs to road construction and grounds maintenance equipment and automotive fleet; and designing, modifying, repairing, and installing hydraulic systems and components. This position is represented by Local 1432 – Int’l Association of Machinists and Aerospace Workers.
Qualifications
Education and Experience:
Three (3) years of experience as a journey level equipment/vehicle Technician Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience. Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable.
Must possess a valid motor vehicle operator’s license.
Must possess or be able to obtain a Commercial Drivers License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire.
Experience in welding and fabrication is highly desirable.
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
Selection Process:
Resume and other documents must be attached together in the 'Resume Upload' section of the application. Multiple files are allowed, but all applicant attachments must be uploaded simultaneously, as there is no way to edit or append uploaded materials after submitting the application.
Application Review (Pass/ Fail) - An online application is required. Attaching a resume does not substitute for a completed application; incomplete applications will not pass the application review. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Practical Exam (Pass/Fail) - This recruitment may require a practical exam which will be job related and may include, but not limited to, the qualifications outlined in the job announcement. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Oral Interview - The interview will be job related and may include, not limited to, the qualifications outlined in the job announcement. Top candidate(s) will continue in the process.
Employment references will be conducted for the final candidates and may include verification of education.
It is general policy of the County that new employees should be hired at the lower steps of the applicable range and advance through the range at the normal progression.
Examples of Duties
Duties may include but are not limited to the following:
Inspects, diagnoses and makes repairs to mechanical equipment such as passenger vehicles, back hoes, excavators, graders, dozers, heavy trucks and accessories, snow removal equipment, loaders, rollers, vactor control and all other County-owned equipment used in highway maintenance and construction.
Grinds and seats valves; checks guides for wear and springs for tension and breakage.
Replaces injectors and fuel pump and re-assembles to specifications.
Checks manual and automatic transmissions and replaces bearings, gears and forks if necessary.
Pulls wheels and replaces or repacks wheel bearings and refaces or replaces drums; replaces brake lining and shoes; repairs air cans and checks systems for leaks; repairs air compressors and air governors.
Operates such shop equipment as grinders, AC recovery, vacuum gauge, voltage and regulator tester, wheel balancer, drill press, wheel pullers, lathes, jacks air tools, scope, dwell meter, timing light and various diagnostic hand tools and other equipment used in automotive repairs and diagnoses.
Performs electronic tune-ups and adjustments and uses a variety of diagnostic machines.
Designs, modifies, and installs hydraulic systems and other special accessories to the equipment on hand.
Maintains shop records.
May do some machinist, welder or blacksmith work; may do specialized work, such as body repair and painting.
Road tests vehicles after repair.
Supervises the work of apprentice mechanics.
Perform work as required on boats, outboard motors, out-drives and related marine equipment.
Performs other work as required.
Salary Grade
Local 1432.8
Salary Range
$27.99 - $37.78- per hour
For complete job announcement, application requirements, and to apply on-line (applications on external sites are not monitored), please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Please use Google Chrome or Mozilla Firefox when accessing Candidate Home. By joining the American Red Cross you will touch millions of lives every year and experience the greatness of the human spirit at its best. Are you ready to be part of the world's largest humanitarian network? Join us—Where your Career is a Force for Good! Job Description: Why Choose Us? As one of the nation’s premier humanitarian organizations, the American Red Cross is dedicated to helping people in need throughout the United States and, in association with other Red Cross networks, throughout the world. When you join our team, you have a direct impact on a meaningful mission, and you can help save lives every day. If you share our passion for helping people, join us in this excellent career opportunity. Work where your career is a force for good. We are committed to the diversity of our workforce and to delivering our programs and services in a culturally competent manner reflecting the communities we serve. Our work environment is collaborative, respectful, and inclusive with a focus on building allyship and a culture of belonging that empowers all team members. Come to learn, grow, and succeed while sharing your passion for making a difference. The Red Cross supports a variety of cultural and community resource groups for employees and volunteers. From the Ability Network, our Asian American & Pacific Islander Resource Group, the Latino Resource Group, and Red Cross PRIDE, to the Umoja African American Resource Group, our Veterans+ Resource Group, and the Women’s Resource Group, these networks provide connections, mentoring and help give voice to important concerns and opinions. What you Need to Know: As a Biomedical Equipment Technician, you will work under close supervisor to repair, calibrate, and maintain all types of basic biomedical equipment, devices, instruments, and systems Inspect, install, and provide preventive maintenance of general biomedical equipment. Provide support, development and/or leadership guidance to all volunteers. WHERE YOUR CAREER IS A FORCE FOR GOOD: Key Responsibilities: Perform a variety of routine tasks associated with the installation, service and calibration of a diverse range of biomedical equipment and instrumentation. Install, qualify, maintain service, modify, troubleshoot, safety test, and calibrate a variety of biomedical equipment and instrumentation by interpreting engineering and vendor information, schematic diagrams and graphic illustrations. Diagnose and correct system or equipment malfunctions by repairing or replacing parts to ensure that biomedical equipment and internal circuitry meets specified requirements. Assist in the support of a systematic preventive maintenance program for biomedical equipment and instrumentation which may include entry into Computerized Maintenance Management System. Provide technical assistance and instruction to personnel in the operation and maintenance of equipment. Meet departmental performance indicator standards on a consistent basis; Maintain accurate and timely documentation. Standard Schedule: Monday-Friday, day schedule. Some evenings and weekends may be required. Pay Information: Starts at $17.50, goes up based on experience. Includes any applicable shift differentials for working any late nights, over nights, and on the weekends. Note that American Red Cross salaries are aligned to the specific geographic location in which the work is primarily performed. Other factors that may be used to determine your actual salary may include your specific skills, how many years of experience you have and comparison to other employees already in this role. WHAT YOU NEED TO SUCCEED: High School or equivalent required. Maintenance skills in electronics, mechanical or electromechanical device repair preferred. Ability to read color codes on wiring and electrical components. Ability to comprehend and follow both written and oral instructions. Must have a valid Driver’s license with a good driving record as travel may be require Ability to take support calls. Ability to work on a team. Physical Requirements: Regularly required to use hands to finger, handle or feel, reach with hands and arms and talk or hear. Regularly lift and/or move objects 10-50lbs frequently and unassisted; Frequently required to stand, walk, stoop, kneel, crouch or crawl. Occasionally required to sit and climb or balance. Specific vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust and focus. Ability to use a variety of hand and power tools and work with a variety of chemicals and solvents. Position may require climbing of ladders for top-level selection. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. The work environment will consist of moderate noise (i.e. business office with computers, phones and printers, light traffic). The employee must have the ability to work in a small cubicle and have the ability to sit at a computer terminal for an extended period of time. Work in extreme temperatures for short duration. WHAT WILL GIVE YOU THE COMPETITIVE EDGE (Preferred Qualifications): Associates Degree in Electronics or Biomedical Equipment Technology is a plus 1 year of related experience preferred. BENEFITS FOR YOU We take care of you, while you take care of others. As a mission-based organization, we believe our team needs great support to do great work. Our comprehensive benefits help you in balancing home and work. With our resources and perks, you have amazing possibilities at the American Red Cross to advance the learn. · Medical, Dental Vision plans · Health Spending Accounts & Flexible Spending Accounts · PTO + Holidays · 401K with 5% match · Paid Family Leave · Employee Assistance · Disability and Insurance: Short + Long Term · Service Awards and recognition Apply now! Joining our team will provide you with the opportunity to make a difference every day. The American Red Cross is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. Interested in Volunteering? Life’s emergencies don’t stop, and neither do American Red Cross volunteers, who represent more than 90 percent of our workforce to help prevent and alleviate human suffering. You can make a difference by volunteering in a position that appeals to you and allows you to use your unique skills and talents. The Red Cross relies on generous volunteers who give their time and talent to help fulfill our lifesaving mission. Visit redcross.org/volunteertoday to learn more, including our most-needed volunteer positions. To view the EEOC Summary of Rights, click here: Summary of Rights
Feb 14, 2024
Please use Google Chrome or Mozilla Firefox when accessing Candidate Home. By joining the American Red Cross you will touch millions of lives every year and experience the greatness of the human spirit at its best. Are you ready to be part of the world's largest humanitarian network? Join us—Where your Career is a Force for Good! Job Description: Why Choose Us? As one of the nation’s premier humanitarian organizations, the American Red Cross is dedicated to helping people in need throughout the United States and, in association with other Red Cross networks, throughout the world. When you join our team, you have a direct impact on a meaningful mission, and you can help save lives every day. If you share our passion for helping people, join us in this excellent career opportunity. Work where your career is a force for good. We are committed to the diversity of our workforce and to delivering our programs and services in a culturally competent manner reflecting the communities we serve. Our work environment is collaborative, respectful, and inclusive with a focus on building allyship and a culture of belonging that empowers all team members. Come to learn, grow, and succeed while sharing your passion for making a difference. The Red Cross supports a variety of cultural and community resource groups for employees and volunteers. From the Ability Network, our Asian American & Pacific Islander Resource Group, the Latino Resource Group, and Red Cross PRIDE, to the Umoja African American Resource Group, our Veterans+ Resource Group, and the Women’s Resource Group, these networks provide connections, mentoring and help give voice to important concerns and opinions. What you Need to Know: As a Biomedical Equipment Technician, you will work under close supervisor to repair, calibrate, and maintain all types of basic biomedical equipment, devices, instruments, and systems Inspect, install, and provide preventive maintenance of general biomedical equipment. Provide support, development and/or leadership guidance to all volunteers. WHERE YOUR CAREER IS A FORCE FOR GOOD: Key Responsibilities: Perform a variety of routine tasks associated with the installation, service and calibration of a diverse range of biomedical equipment and instrumentation. Install, qualify, maintain service, modify, troubleshoot, safety test, and calibrate a variety of biomedical equipment and instrumentation by interpreting engineering and vendor information, schematic diagrams and graphic illustrations. Diagnose and correct system or equipment malfunctions by repairing or replacing parts to ensure that biomedical equipment and internal circuitry meets specified requirements. Assist in the support of a systematic preventive maintenance program for biomedical equipment and instrumentation which may include entry into Computerized Maintenance Management System. Provide technical assistance and instruction to personnel in the operation and maintenance of equipment. Meet departmental performance indicator standards on a consistent basis; Maintain accurate and timely documentation. Standard Schedule: Monday-Friday, day schedule. Some evenings and weekends may be required. Pay Information: Starts at $17.50, goes up based on experience. Includes any applicable shift differentials for working any late nights, over nights, and on the weekends. Note that American Red Cross salaries are aligned to the specific geographic location in which the work is primarily performed. Other factors that may be used to determine your actual salary may include your specific skills, how many years of experience you have and comparison to other employees already in this role. WHAT YOU NEED TO SUCCEED: High School or equivalent required. Maintenance skills in electronics, mechanical or electromechanical device repair preferred. Ability to read color codes on wiring and electrical components. Ability to comprehend and follow both written and oral instructions. Must have a valid Driver’s license with a good driving record as travel may be require Ability to take support calls. Ability to work on a team. Physical Requirements: Regularly required to use hands to finger, handle or feel, reach with hands and arms and talk or hear. Regularly lift and/or move objects 10-50lbs frequently and unassisted; Frequently required to stand, walk, stoop, kneel, crouch or crawl. Occasionally required to sit and climb or balance. Specific vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust and focus. Ability to use a variety of hand and power tools and work with a variety of chemicals and solvents. Position may require climbing of ladders for top-level selection. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. The work environment will consist of moderate noise (i.e. business office with computers, phones and printers, light traffic). The employee must have the ability to work in a small cubicle and have the ability to sit at a computer terminal for an extended period of time. Work in extreme temperatures for short duration. WHAT WILL GIVE YOU THE COMPETITIVE EDGE (Preferred Qualifications): Associates Degree in Electronics or Biomedical Equipment Technology is a plus 1 year of related experience preferred. BENEFITS FOR YOU We take care of you, while you take care of others. As a mission-based organization, we believe our team needs great support to do great work. Our comprehensive benefits help you in balancing home and work. With our resources and perks, you have amazing possibilities at the American Red Cross to advance the learn. · Medical, Dental Vision plans · Health Spending Accounts & Flexible Spending Accounts · PTO + Holidays · 401K with 5% match · Paid Family Leave · Employee Assistance · Disability and Insurance: Short + Long Term · Service Awards and recognition Apply now! Joining our team will provide you with the opportunity to make a difference every day. The American Red Cross is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. Interested in Volunteering? Life’s emergencies don’t stop, and neither do American Red Cross volunteers, who represent more than 90 percent of our workforce to help prevent and alleviate human suffering. You can make a difference by volunteering in a position that appeals to you and allows you to use your unique skills and talents. The Red Cross relies on generous volunteers who give their time and talent to help fulfill our lifesaving mission. Visit redcross.org/volunteertoday to learn more, including our most-needed volunteer positions. To view the EEOC Summary of Rights, click here: Summary of Rights
Job Summary
Clark County Public Works is currently seeking a Civil Engineer to join its Engineering & Design Section, one of a handful of groups that make up its Engineering & Construction Division. The 10-person Engineering and Design Section has the tight-knit feel of a small firm with access to the expertise and resources of the larger Clark County Public Works organization. The team is production oriented with a focus on design and plan production to support the County’s Capital Improvement Programs. Engineering and Design Section engineers design county infrastructure and have opportunities for career development through planning, project development, project management, emergency response assistance and other interesting and challenging work. This position will be primarily focused on stormwater modeling and design with opportunities for civil road design, specification, and standards development. This position is open to a range of possible career experiences and can be underfilled as an Engineer I. This is a limited duration appointment that is expected to end on or before three years from date of hire. Limited duration appointments are benefits eligible and have a designated maximum length of service. This position has potential to become permanent. This position does have the option of a hybrid remote work schedule, however, the candidate selected must reside in either Washington or Oregon. No exceptions. This position is represented by Local 17, Professional and Technical Employees. Applications will be accepted until an adequate number of applications are received. This posting may close at any time after 2/29/2024 with no additional notice.
Qualifications
Qualifications:
Engineer I:
B.S. degree in Civil or related Engineering; OR
High School diploma or G.E.D. and two (2) years relative engineering work experience and possession of an E.I.T. certification.
Engineer II:
B.S. degree in Civil or related Engineering and two (2) years experience in an Engineering I classification or equivalent.; OR
High School diploma or G.E.D. and four (4) years relative engineering work experience to include a minimum of two (2) years experience in an Engineering I classification or equivalent and possession of an E.I.T. certification.
Knowledge of: Principles and practices of civil engineering and of the physical sciences (hydraulics, mechanics, etc.) involved; modern and efficient engineering methods and techniques in the design, construction and maintenance of facilities relative to one or more areas of Public Works engineering (e.g. Transportation, Design, Utility, Construction, etc.); project management, including planning, scheduling, monitoring, and problem solving; Knowledge of the application and interpretation of County regulatory codes, state regulatory and legislative requirements, court decisions and Attorney Generals opinions concerning the wide variety of engineering functions; departmental policies and procedures, work standards and codes applicable to the job.
Ability to: Establish and maintain effective working relationships with engineering and survey staff, contractors, and the public; adopt approved engineering methods and standards to the planning, design and construction of a variety of public works projects; read and interpret complex plans and specifications and to become familiar with engineering standards; perform highly technical research work and to give reliable advice on difficult engineering problems; prepare, draft, interpret and utilize complex engineering plans, maps, specifications and reports, and to maintain orderly, accurate engineering records; perform complex and difficult engineering computations in designing major engineering projects; inspect and provide direction to technicians inspecting the work of contractors on complex engineering projects and to obtain adherence to plans and specifications; coordinate and effectively manage resources dedicated to a number of ongoing projects; communicate and express ideas effectively, orally and in writing, including public speaking; give accurate and factual testimony at hearings or trials.
Skill In: The use and care of instruments and equipment employed in the area of specialization.
Selection Process:
Resume and other documents must be attached together in the 'Resume Upload' section of the application. Multiple files are allowed, but all applicant attachments must be uploaded simultaneously, as there is no way to edit or append uploaded materials after submitting the application.
Application Review (Pass/ Fail) - An online application is required. Attaching a resume does not substitute for a completed application; incomplete applications will not pass the application review. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Practical Exam (Pass/Fail) - This recruitment may require a practical exam which will be job related and may include, but not limited to, the qualifications outlined in the job announcement. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Oral Interview - The interview will be job related and may include, not limited to, the qualifications outlined in the job announcement. Top candidate(s) will continue in the process.
Employment references will be conducted for the final candidates and may include verification of education.
It is general policy of the County that new employees should be hired at the lower steps of the applicable range and advance through the range at the normal progression.
Examples of Duties
KEY OR TYPICAL TASKS AND RESPONSIBILITIES
Designs, prepares and coordinates the development of construction engineering plans and specifications on major road, bridge, sewer and drainage, or traffic signal and transportation improvement projects; determines intersection, box culvert, pump station and similar designs. Develops cost estimates and recommendations towards final cost estimates.
Directs and participates in the development of detailed construction drawings, topographical profiles and related maps and specification sheets used in Public Works design projects planning and construction.
Reviews move difficult design plans and specifications for conformance to job requirements. Develops and checks more difficult specialized contract provisions, design agreements and design calculations and may attend pre-bid and pre-construction conferences to outline primary construction features.
Computes more difficult mathematical calculations used in developing profile, cross-sections, etc. Plots, profiles and cross-sections, figures grade lines, calculates plots and calculates traverses and similar criteria. Establishes points and elevations, proper location and drainage for streets, sewers, runways and other like structures.
Conducts studies and analyses on suitability of existing infrastructure facilities and general policies, and feasibility (economic, realistic) of proposed designs. Interprets results and makes recommendations, both short and long term, relative to the subject assigned. Utilizes the computer as an aid to analyzing and developing solutions to engineering problems.
Reviews development plans for sewer and storm drainage for compliance with County Standards. Prepares staff reports with respect to utilities for proposed developments. Designs and coordinates sewer and drainage improvement projects. Prepares summaries of design deficiencies and recommends the proper corrective action.
Inspects the construction of public works projects; reviews plans and specifications for contract construction work; observes the work of the contractor and verifies that it conforms to plans and specifications; checks material quantities and quality; prepares and reviews the preparation of monthly cost and progress estimates, other engineering data and final reports upon the completion of construction jobs.
Develops and maintains effective relations with the public. Represents Public Works on various committees; at neighborhood organization and community meetings; public hearings; before governmental bodies and in legal processes.
Prepares complex technical engineering and administrative reports and develops critical correspondence and comprehensive reports in support of engineering projects and decisions.
Participates in the development, implementation and review of ongoing programs and existing methods assessing job effectiveness and cost efficiencies.
Participates in the formulation and updating of goals and objectives consistent with the mission of the Department.
Prepares more difficult and administrative reports, develops correspondence, records, and comprehensive reports as assigned in support of engineering projects.
Performs other related duties as assigned.
Salary Grade
Local 17 Engineers.107 - Local 17 Engineers.110
Salary Range
$33.48 - $47.27- per hour
For complete job announcement, application requirements, and to apply on-line (applications on external sites are not monitored), please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Dec 21, 2023
Full time
Job Summary
Clark County Public Works is currently seeking a Civil Engineer to join its Engineering & Design Section, one of a handful of groups that make up its Engineering & Construction Division. The 10-person Engineering and Design Section has the tight-knit feel of a small firm with access to the expertise and resources of the larger Clark County Public Works organization. The team is production oriented with a focus on design and plan production to support the County’s Capital Improvement Programs. Engineering and Design Section engineers design county infrastructure and have opportunities for career development through planning, project development, project management, emergency response assistance and other interesting and challenging work. This position will be primarily focused on stormwater modeling and design with opportunities for civil road design, specification, and standards development. This position is open to a range of possible career experiences and can be underfilled as an Engineer I. This is a limited duration appointment that is expected to end on or before three years from date of hire. Limited duration appointments are benefits eligible and have a designated maximum length of service. This position has potential to become permanent. This position does have the option of a hybrid remote work schedule, however, the candidate selected must reside in either Washington or Oregon. No exceptions. This position is represented by Local 17, Professional and Technical Employees. Applications will be accepted until an adequate number of applications are received. This posting may close at any time after 2/29/2024 with no additional notice.
Qualifications
Qualifications:
Engineer I:
B.S. degree in Civil or related Engineering; OR
High School diploma or G.E.D. and two (2) years relative engineering work experience and possession of an E.I.T. certification.
Engineer II:
B.S. degree in Civil or related Engineering and two (2) years experience in an Engineering I classification or equivalent.; OR
High School diploma or G.E.D. and four (4) years relative engineering work experience to include a minimum of two (2) years experience in an Engineering I classification or equivalent and possession of an E.I.T. certification.
Knowledge of: Principles and practices of civil engineering and of the physical sciences (hydraulics, mechanics, etc.) involved; modern and efficient engineering methods and techniques in the design, construction and maintenance of facilities relative to one or more areas of Public Works engineering (e.g. Transportation, Design, Utility, Construction, etc.); project management, including planning, scheduling, monitoring, and problem solving; Knowledge of the application and interpretation of County regulatory codes, state regulatory and legislative requirements, court decisions and Attorney Generals opinions concerning the wide variety of engineering functions; departmental policies and procedures, work standards and codes applicable to the job.
Ability to: Establish and maintain effective working relationships with engineering and survey staff, contractors, and the public; adopt approved engineering methods and standards to the planning, design and construction of a variety of public works projects; read and interpret complex plans and specifications and to become familiar with engineering standards; perform highly technical research work and to give reliable advice on difficult engineering problems; prepare, draft, interpret and utilize complex engineering plans, maps, specifications and reports, and to maintain orderly, accurate engineering records; perform complex and difficult engineering computations in designing major engineering projects; inspect and provide direction to technicians inspecting the work of contractors on complex engineering projects and to obtain adherence to plans and specifications; coordinate and effectively manage resources dedicated to a number of ongoing projects; communicate and express ideas effectively, orally and in writing, including public speaking; give accurate and factual testimony at hearings or trials.
Skill In: The use and care of instruments and equipment employed in the area of specialization.
Selection Process:
Resume and other documents must be attached together in the 'Resume Upload' section of the application. Multiple files are allowed, but all applicant attachments must be uploaded simultaneously, as there is no way to edit or append uploaded materials after submitting the application.
Application Review (Pass/ Fail) - An online application is required. Attaching a resume does not substitute for a completed application; incomplete applications will not pass the application review. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Practical Exam (Pass/Fail) - This recruitment may require a practical exam which will be job related and may include, but not limited to, the qualifications outlined in the job announcement. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Oral Interview - The interview will be job related and may include, not limited to, the qualifications outlined in the job announcement. Top candidate(s) will continue in the process.
Employment references will be conducted for the final candidates and may include verification of education.
It is general policy of the County that new employees should be hired at the lower steps of the applicable range and advance through the range at the normal progression.
Examples of Duties
KEY OR TYPICAL TASKS AND RESPONSIBILITIES
Designs, prepares and coordinates the development of construction engineering plans and specifications on major road, bridge, sewer and drainage, or traffic signal and transportation improvement projects; determines intersection, box culvert, pump station and similar designs. Develops cost estimates and recommendations towards final cost estimates.
Directs and participates in the development of detailed construction drawings, topographical profiles and related maps and specification sheets used in Public Works design projects planning and construction.
Reviews move difficult design plans and specifications for conformance to job requirements. Develops and checks more difficult specialized contract provisions, design agreements and design calculations and may attend pre-bid and pre-construction conferences to outline primary construction features.
Computes more difficult mathematical calculations used in developing profile, cross-sections, etc. Plots, profiles and cross-sections, figures grade lines, calculates plots and calculates traverses and similar criteria. Establishes points and elevations, proper location and drainage for streets, sewers, runways and other like structures.
Conducts studies and analyses on suitability of existing infrastructure facilities and general policies, and feasibility (economic, realistic) of proposed designs. Interprets results and makes recommendations, both short and long term, relative to the subject assigned. Utilizes the computer as an aid to analyzing and developing solutions to engineering problems.
Reviews development plans for sewer and storm drainage for compliance with County Standards. Prepares staff reports with respect to utilities for proposed developments. Designs and coordinates sewer and drainage improvement projects. Prepares summaries of design deficiencies and recommends the proper corrective action.
Inspects the construction of public works projects; reviews plans and specifications for contract construction work; observes the work of the contractor and verifies that it conforms to plans and specifications; checks material quantities and quality; prepares and reviews the preparation of monthly cost and progress estimates, other engineering data and final reports upon the completion of construction jobs.
Develops and maintains effective relations with the public. Represents Public Works on various committees; at neighborhood organization and community meetings; public hearings; before governmental bodies and in legal processes.
Prepares complex technical engineering and administrative reports and develops critical correspondence and comprehensive reports in support of engineering projects and decisions.
Participates in the development, implementation and review of ongoing programs and existing methods assessing job effectiveness and cost efficiencies.
Participates in the formulation and updating of goals and objectives consistent with the mission of the Department.
Prepares more difficult and administrative reports, develops correspondence, records, and comprehensive reports as assigned in support of engineering projects.
Performs other related duties as assigned.
Salary Grade
Local 17 Engineers.107 - Local 17 Engineers.110
Salary Range
$33.48 - $47.27- per hour
For complete job announcement, application requirements, and to apply on-line (applications on external sites are not monitored), please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Job Summary
This position diagnoses problems and makes mechanical repairs to all types of equipment used in roadway and parts maintenance and performs vehicular maintenance for all county departments. The Technician at times will be working in the field three or more hours per shift servicing equipment. This is a journey level position requiring experience in welding and fabrication, maintaining gas and diesel truck engines, and hydraulically operated equipment. Major duties include: inspecting, diagnosing, and making repairs to road construction and grounds maintenance equipment and automotive fleet; and designing, modifying, repairing, and installing hydraulic systems and components. This position is represented by Local 1432 – Int’l Association of Machinists and Aerospace Workers.
Qualifications
Education and Experience:
Three (3) years of experience as a journey level equipment/vehicle Technician Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience. Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable.
Must possess a valid motor vehicle operator’s license.
Must possess or be able to obtain a Commercial Drivers License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire.
Experience in welding and fabrication is highly desirable.
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
Selection Process:
Resume and other documents must be attached together in the 'Resume Upload' section of the application. Multiple files are allowed, but all applicant attachments must be uploaded simultaneously, as there is no way to edit or append uploaded materials after submitting the application.
Application Review (Pass/ Fail) - An online application is required. Attaching a resume does not substitute for a completed application; incomplete applications will not pass the application review. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Practical Exam (Pass/Fail) - This recruitment may require a practical exam which will be job related and may include, but not limited to, the qualifications outlined in the job announcement. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Oral Interview - The interview will be job related and may include, not limited to, the qualifications outlined in the job announcement. Top candidate(s) will continue in the process.
Employment references will be conducted for the final candidates and may include verification of education.
It is general policy of the County that new employees should be hired at the lower steps of the applicable range and advance through the range at the normal progression.
Examples of Duties
Duties may include but are not limited to the following:
Inspects, diagnoses and makes repairs to mechanical equipment such as passenger vehicles, back hoes, excavators, graders, dozers, heavy trucks and accessories, snow removal equipment, loaders, rollers, vactor control and all other County-owned equipment used in highway maintenance and construction.
Grinds and seats valves; checks guides for wear and springs for tension and breakage.
Replaces injectors and fuel pump and re-assembles to specifications.
Checks manual and automatic transmissions and replaces bearings, gears and forks if necessary.
Pulls wheels and replaces or repacks wheel bearings and refaces or replaces drums; replaces brake lining and shoes; repairs air cans and checks systems for leaks; repairs air compressors and air governors.
Operates such shop equipment as grinders, AC recovery, vacuum gauge, voltage and regulator tester, wheel balancer, drill press, wheel pullers, lathes, jacks air tools, scope, dwell meter, timing light and various diagnostic hand tools and other equipment used in automotive repairs and diagnoses.
Performs electronic tune-ups and adjustments and uses a variety of diagnostic machines.
Designs, modifies, and installs hydraulic systems and other special accessories to the equipment on hand.
Maintains shop records.
May do some machinist, welder or blacksmith work; may do specialized work, such as body repair and painting.
Road tests vehicles after repair.
Supervises the work of apprentice mechanics.
Perform work as required on boats, outboard motors, out-drives and related marine equipment.
Performs other work as required.
Salary Grade
Local 1432.8
Salary Range
$27.44 - $37.04- per hour
For complete job announcement, application requirements, and to apply on-line (applications on external sites are not monitored), please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Nov 14, 2023
Full time
Job Summary
This position diagnoses problems and makes mechanical repairs to all types of equipment used in roadway and parts maintenance and performs vehicular maintenance for all county departments. The Technician at times will be working in the field three or more hours per shift servicing equipment. This is a journey level position requiring experience in welding and fabrication, maintaining gas and diesel truck engines, and hydraulically operated equipment. Major duties include: inspecting, diagnosing, and making repairs to road construction and grounds maintenance equipment and automotive fleet; and designing, modifying, repairing, and installing hydraulic systems and components. This position is represented by Local 1432 – Int’l Association of Machinists and Aerospace Workers.
Qualifications
Education and Experience:
Three (3) years of experience as a journey level equipment/vehicle Technician Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience. Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable.
Must possess a valid motor vehicle operator’s license.
Must possess or be able to obtain a Commercial Drivers License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire.
Experience in welding and fabrication is highly desirable.
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
Selection Process:
Resume and other documents must be attached together in the 'Resume Upload' section of the application. Multiple files are allowed, but all applicant attachments must be uploaded simultaneously, as there is no way to edit or append uploaded materials after submitting the application.
Application Review (Pass/ Fail) - An online application is required. Attaching a resume does not substitute for a completed application; incomplete applications will not pass the application review. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Practical Exam (Pass/Fail) - This recruitment may require a practical exam which will be job related and may include, but not limited to, the qualifications outlined in the job announcement. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Oral Interview - The interview will be job related and may include, not limited to, the qualifications outlined in the job announcement. Top candidate(s) will continue in the process.
Employment references will be conducted for the final candidates and may include verification of education.
It is general policy of the County that new employees should be hired at the lower steps of the applicable range and advance through the range at the normal progression.
Examples of Duties
Duties may include but are not limited to the following:
Inspects, diagnoses and makes repairs to mechanical equipment such as passenger vehicles, back hoes, excavators, graders, dozers, heavy trucks and accessories, snow removal equipment, loaders, rollers, vactor control and all other County-owned equipment used in highway maintenance and construction.
Grinds and seats valves; checks guides for wear and springs for tension and breakage.
Replaces injectors and fuel pump and re-assembles to specifications.
Checks manual and automatic transmissions and replaces bearings, gears and forks if necessary.
Pulls wheels and replaces or repacks wheel bearings and refaces or replaces drums; replaces brake lining and shoes; repairs air cans and checks systems for leaks; repairs air compressors and air governors.
Operates such shop equipment as grinders, AC recovery, vacuum gauge, voltage and regulator tester, wheel balancer, drill press, wheel pullers, lathes, jacks air tools, scope, dwell meter, timing light and various diagnostic hand tools and other equipment used in automotive repairs and diagnoses.
Performs electronic tune-ups and adjustments and uses a variety of diagnostic machines.
Designs, modifies, and installs hydraulic systems and other special accessories to the equipment on hand.
Maintains shop records.
May do some machinist, welder or blacksmith work; may do specialized work, such as body repair and painting.
Road tests vehicles after repair.
Supervises the work of apprentice mechanics.
Perform work as required on boats, outboard motors, out-drives and related marine equipment.
Performs other work as required.
Salary Grade
Local 1432.8
Salary Range
$27.44 - $37.04- per hour
For complete job announcement, application requirements, and to apply on-line (applications on external sites are not monitored), please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Job Summary
This position diagnoses problems and makes mechanical repairs to all types of equipment used in roadway and parts maintenance and performs vehicular maintenance for all county departments. The Technician at times will be working in the field three or more hours per shift servicing equipment. This is a journey level position requiring experience in welding and fabrication, maintaining gas and diesel truck engines, and hydraulically operated equipment. Major duties include: inspecting, diagnosing, and making repairs to road construction and grounds maintenance equipment and automotive fleet; and designing, modifying, repairing, and installing hydraulic systems and components. This position is represented by Local 1432 – Int’l Association of Machinists and Aerospace Workers.
Qualifications
Education and Experience:
Three (3) years of experience as a journey level equipment/vehicle Technician Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience. Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable.
Must possess a valid motor vehicle operator’s license.
Must possess or be able to obtain a Commercial Drivers License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire.
Experience in welding and fabrication is highly desirable.
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
Selection Process:
Resume and other documents must be attached together in the 'Resume Upload' section of the application. Multiple files are allowed, but all applicant attachments must be uploaded simultaneously, as there is no way to edit or append uploaded materials after submitting the application.
Application Review (Pass/ Fail) - An online application is required. Attaching a resume does not substitute for a completed application; incomplete applications will not pass the application review. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Practical Exam (Pass/Fail) - This recruitment may require a practical exam which will be job related and may include, but not limited to, the qualifications outlined in the job announcement. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Oral Interview - The interview will be job related and may include, not limited to, the qualifications outlined in the job announcement. Top candidate(s) will continue in the process.
Employment references will be conducted for the final candidates and may include verification of education.
It is general policy of the County that new employees should be hired at the lower steps of the applicable range and advance through the range at the normal progression.
Examples of Duties
Duties may include but are not limited to the following:
Inspects, diagnoses and makes repairs to mechanical equipment such as passenger vehicles, back hoes, excavators, graders, dozers, heavy trucks and accessories, snow removal equipment, loaders, rollers, vactor control and all other County-owned equipment used in highway maintenance and construction.
Grinds and seats valves; checks guides for wear and springs for tension and breakage.
Replaces injectors and fuel pump and re-assembles to specifications.
Checks manual and automatic transmissions and replaces bearings, gears and forks if necessary.
Pulls wheels and replaces or repacks wheel bearings and refaces or replaces drums; replaces brake lining and shoes; repairs air cans and checks systems for leaks; repairs air compressors and air governors.
Operates such shop equipment as grinders, AC recovery, vacuum gauge, voltage and regulator tester, wheel balancer, drill press, wheel pullers, lathes, jacks air tools, scope, dwell meter, timing light and various diagnostic hand tools and other equipment used in automotive repairs and diagnoses.
Performs electronic tune-ups and adjustments and uses a variety of diagnostic machines.
Designs, modifies, and installs hydraulic systems and other special accessories to the equipment on hand.
Maintains shop records.
May do some machinist, welder or blacksmith work; may do specialized work, such as body repair and painting.
Road tests vehicles after repair.
Supervises the work of apprentice mechanics.
Perform work as required on boats, outboard motors, out-drives and related marine equipment.
Performs other work as required.
Salary Grade
Local 1432.8
Salary Range
$27.44 - $37.04- per hour
Oct 27, 2023
Full time
Job Summary
This position diagnoses problems and makes mechanical repairs to all types of equipment used in roadway and parts maintenance and performs vehicular maintenance for all county departments. The Technician at times will be working in the field three or more hours per shift servicing equipment. This is a journey level position requiring experience in welding and fabrication, maintaining gas and diesel truck engines, and hydraulically operated equipment. Major duties include: inspecting, diagnosing, and making repairs to road construction and grounds maintenance equipment and automotive fleet; and designing, modifying, repairing, and installing hydraulic systems and components. This position is represented by Local 1432 – Int’l Association of Machinists and Aerospace Workers.
Qualifications
Education and Experience:
Three (3) years of experience as a journey level equipment/vehicle Technician Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience. Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable.
Must possess a valid motor vehicle operator’s license.
Must possess or be able to obtain a Commercial Drivers License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire.
Experience in welding and fabrication is highly desirable.
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
Selection Process:
Resume and other documents must be attached together in the 'Resume Upload' section of the application. Multiple files are allowed, but all applicant attachments must be uploaded simultaneously, as there is no way to edit or append uploaded materials after submitting the application.
Application Review (Pass/ Fail) - An online application is required. Attaching a resume does not substitute for a completed application; incomplete applications will not pass the application review. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Practical Exam (Pass/Fail) - This recruitment may require a practical exam which will be job related and may include, but not limited to, the qualifications outlined in the job announcement. Candidates deemed most qualified will be invited to participate in the remainder of the selection process.
Oral Interview - The interview will be job related and may include, not limited to, the qualifications outlined in the job announcement. Top candidate(s) will continue in the process.
Employment references will be conducted for the final candidates and may include verification of education.
It is general policy of the County that new employees should be hired at the lower steps of the applicable range and advance through the range at the normal progression.
Examples of Duties
Duties may include but are not limited to the following:
Inspects, diagnoses and makes repairs to mechanical equipment such as passenger vehicles, back hoes, excavators, graders, dozers, heavy trucks and accessories, snow removal equipment, loaders, rollers, vactor control and all other County-owned equipment used in highway maintenance and construction.
Grinds and seats valves; checks guides for wear and springs for tension and breakage.
Replaces injectors and fuel pump and re-assembles to specifications.
Checks manual and automatic transmissions and replaces bearings, gears and forks if necessary.
Pulls wheels and replaces or repacks wheel bearings and refaces or replaces drums; replaces brake lining and shoes; repairs air cans and checks systems for leaks; repairs air compressors and air governors.
Operates such shop equipment as grinders, AC recovery, vacuum gauge, voltage and regulator tester, wheel balancer, drill press, wheel pullers, lathes, jacks air tools, scope, dwell meter, timing light and various diagnostic hand tools and other equipment used in automotive repairs and diagnoses.
Performs electronic tune-ups and adjustments and uses a variety of diagnostic machines.
Designs, modifies, and installs hydraulic systems and other special accessories to the equipment on hand.
Maintains shop records.
May do some machinist, welder or blacksmith work; may do specialized work, such as body repair and painting.
Road tests vehicles after repair.
Supervises the work of apprentice mechanics.
Perform work as required on boats, outboard motors, out-drives and related marine equipment.
Performs other work as required.
Salary Grade
Local 1432.8
Salary Range
$27.44 - $37.04- per hour
PRINCIPAL ACCOUNTABILITY
This position will be under general supervision of the Fleet Manager. The Mechanic will exercise reasonable judgment in performing routine maintenance and repair of fleet vehicles. Performs repair work, diagnoses, and resolves breakdowns and other malfunctions including roadside repair in a safe, efficient, and quality manner. When needed determines to take vehicles out-of-service or put back in service based on current condition.
Additionally, the mechanic will monitor and record the status of company vehicles, equipment, and related items. The employee must have the ability to handle routine documentation and paperwork regarding Fleet Maintenance records or work orders. Regular full-time attendance is required during office hours. In addition to regularly scheduled hours, this position is subject to “on-call” duties and varying shifts. A valid Texas driver’s license is required, as well as an acceptable driving record (as specified in the current Vehicle Loss Control Guide).
EDUCATION
High School Diploma or GED.
Completion of Small Engine Repair or field-related course preferred.
Completion of an automotive technical program or automotive maintenance program preferred.
Texas Commercial Driver’s License preferred.
ASE certification a plus.
EXPERIENCE
2 years of hands-on experience in automotive or related repairs
Experience with commercial vehicle repair preferred
Experience using modern equipment (including computer tools)
Experience with industry-related tools and equipment.
SKILLLS AND KNOWLEDGE
Ability to lift 50 pounds.
Defensive Driving must be completed within 90 days of employment.
Computer skills including apps used in iPhone and iPad and similar devices.
Carter Bloodcare is an EEO/Affirmative Action employer. Carter Bloodcare provides equal employment opportunities (EEO) to all employees and applicants and will not discriminate in its employment practices due to an employee’s or applicant’s race, color, religion, sex, sexual orientation, gender identity, age, national origin, genetic, and veteran or disability status. In addition to federal law requirements, Carter BloodCare complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Carter Bloodcare is a Pro Disabled & Veteran Employer.
We maintain a drug-free workplace and perform pre-employment substance abuse testing.
Aug 22, 2023
Full time
PRINCIPAL ACCOUNTABILITY
This position will be under general supervision of the Fleet Manager. The Mechanic will exercise reasonable judgment in performing routine maintenance and repair of fleet vehicles. Performs repair work, diagnoses, and resolves breakdowns and other malfunctions including roadside repair in a safe, efficient, and quality manner. When needed determines to take vehicles out-of-service or put back in service based on current condition.
Additionally, the mechanic will monitor and record the status of company vehicles, equipment, and related items. The employee must have the ability to handle routine documentation and paperwork regarding Fleet Maintenance records or work orders. Regular full-time attendance is required during office hours. In addition to regularly scheduled hours, this position is subject to “on-call” duties and varying shifts. A valid Texas driver’s license is required, as well as an acceptable driving record (as specified in the current Vehicle Loss Control Guide).
EDUCATION
High School Diploma or GED.
Completion of Small Engine Repair or field-related course preferred.
Completion of an automotive technical program or automotive maintenance program preferred.
Texas Commercial Driver’s License preferred.
ASE certification a plus.
EXPERIENCE
2 years of hands-on experience in automotive or related repairs
Experience with commercial vehicle repair preferred
Experience using modern equipment (including computer tools)
Experience with industry-related tools and equipment.
SKILLLS AND KNOWLEDGE
Ability to lift 50 pounds.
Defensive Driving must be completed within 90 days of employment.
Computer skills including apps used in iPhone and iPad and similar devices.
Carter Bloodcare is an EEO/Affirmative Action employer. Carter Bloodcare provides equal employment opportunities (EEO) to all employees and applicants and will not discriminate in its employment practices due to an employee’s or applicant’s race, color, religion, sex, sexual orientation, gender identity, age, national origin, genetic, and veteran or disability status. In addition to federal law requirements, Carter BloodCare complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Carter Bloodcare is a Pro Disabled & Veteran Employer.
We maintain a drug-free workplace and perform pre-employment substance abuse testing.
Job Summary
This position diagnoses problems and makes mechanical repairs to all types of equipment used in roadway and parts maintenance and performs vehicular maintenance for all county departments. The Technician at times will be working in the field three or more hours per shift servicing equipment. This is a journey level position requiring experience in welding and fabrication, maintaining gas and diesel truck engines, and hydraulically operated equipment. Major duties include: inspecting, diagnosing, and making repairs to road construction and grounds maintenance equipment and automotive fleet; and designing, modifying, repairing, and installing hydraulic systems and components.
Qualifications
Education and Experience:
Three (3) years of experience as a journey level equipment/vehicle Technician Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience. Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable.
Must possess a valid motor vehicle operator’s license.
Must possess or be able to obtain a Commercial Drivers License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire.
Experience in welding and fabrication is highly desirable.
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade: Local 1432.177 $30.49 - $34.61- per hour
Apr 14, 2023
Full time
Job Summary
This position diagnoses problems and makes mechanical repairs to all types of equipment used in roadway and parts maintenance and performs vehicular maintenance for all county departments. The Technician at times will be working in the field three or more hours per shift servicing equipment. This is a journey level position requiring experience in welding and fabrication, maintaining gas and diesel truck engines, and hydraulically operated equipment. Major duties include: inspecting, diagnosing, and making repairs to road construction and grounds maintenance equipment and automotive fleet; and designing, modifying, repairing, and installing hydraulic systems and components.
Qualifications
Education and Experience:
Three (3) years of experience as a journey level equipment/vehicle Technician Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience. Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable.
Must possess a valid motor vehicle operator’s license.
Must possess or be able to obtain a Commercial Drivers License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire.
Experience in welding and fabrication is highly desirable.
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade: Local 1432.177 $30.49 - $34.61- per hour
Job Summary
Clark County Public Works is currently seeking a Civil Engineer to join its Engineering & Design Section, one of a handful of groups that make up its Engineering & Construction Division. Although Clark County Public Works has the resources and expertise of a large organization, the smaller Engineering & Design Section has the intimate, tight-knit feel of a small firm.
The 10-person team is production oriented. Our engineers design county infrastructure and also have opportunities for career development through planning, project development, emergency response assistance and other interesting and challenging work.
Qualifications
Engineer II:
S. degree in Civil or related Engineering and two (2) years experience in an Engineering I classification or equivalent.; OR
High School diploma or G.E.D. and four (4) years relative engineering work experience to include a minimum of two (2) years experience in an Engineering I classification or equivalent and possession of an E.I.T. certification.
Engineer III:
S. degree in Civil or related engineering and two (2) years of experience in an Engineer II or equivalent position and registration as a professional civil or structural engineer; AND
Possess or be able to obtain a valid driver's license by date of appointment.
Knowledge of: Principles and practices of civil engineering and of the physical sciences (hydraulics, mechanics, etc.) involved; modern and efficient engineering methods and techniques in the design, construction and maintenance of facilities relative to one or more areas of Public Works engineering (e.g. Transportation, Design, Utility, Construction, etc.); project management, including planning, scheduling, monitoring, and problem solving; Knowledge of the application and interpretation of County regulatory codes, state regulatory and legislative requirements, court decisions and Attorney Generals opinions concerning the wide variety of engineering functions; departmental policies and procedures, work standards and codes applicable to the job.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade: Local 17 Engineers.210 - Local 17 Engineers.213 $33.08 - $48.92- per hour
Mar 17, 2023
Full time
Job Summary
Clark County Public Works is currently seeking a Civil Engineer to join its Engineering & Design Section, one of a handful of groups that make up its Engineering & Construction Division. Although Clark County Public Works has the resources and expertise of a large organization, the smaller Engineering & Design Section has the intimate, tight-knit feel of a small firm.
The 10-person team is production oriented. Our engineers design county infrastructure and also have opportunities for career development through planning, project development, emergency response assistance and other interesting and challenging work.
Qualifications
Engineer II:
S. degree in Civil or related Engineering and two (2) years experience in an Engineering I classification or equivalent.; OR
High School diploma or G.E.D. and four (4) years relative engineering work experience to include a minimum of two (2) years experience in an Engineering I classification or equivalent and possession of an E.I.T. certification.
Engineer III:
S. degree in Civil or related engineering and two (2) years of experience in an Engineer II or equivalent position and registration as a professional civil or structural engineer; AND
Possess or be able to obtain a valid driver's license by date of appointment.
Knowledge of: Principles and practices of civil engineering and of the physical sciences (hydraulics, mechanics, etc.) involved; modern and efficient engineering methods and techniques in the design, construction and maintenance of facilities relative to one or more areas of Public Works engineering (e.g. Transportation, Design, Utility, Construction, etc.); project management, including planning, scheduling, monitoring, and problem solving; Knowledge of the application and interpretation of County regulatory codes, state regulatory and legislative requirements, court decisions and Attorney Generals opinions concerning the wide variety of engineering functions; departmental policies and procedures, work standards and codes applicable to the job.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade: Local 17 Engineers.210 - Local 17 Engineers.213 $33.08 - $48.92- per hour
The Battery Engineer will be a key contributor to the Engineering team, responsible for performing and coordinating electrical, mechanical, and thermal testing, as well as electrochemical characterization, of our NiZn batteries. The Battery Engineer will be responsible for characterizing cell and system performance, developing and implementing accelerated testing approaches, and using statistical analysis tools to correlate experimental results with variations in cell/system parameters. The successful candidate will be a hands-on, resourceful problem-solver, and a consummate team player with excellent communication skills. Emphasis will be placed on experience in the development of battery technology, battery characterization techniques and/or accelerated test protocols for lifetime prediction. This position will be worked onsite at our headquarters in Tualatin, Oregon.
Battery Engineer Job Duties:
Develop and implement accelerated test protocols to characterize and improve performance and lifetime, at the cell, pack, and system level
Use design-of-experiment (DOE) approaches to aid in optimizing cell and system design
Improve system performance by executing root cause failure analysis and providing recommendations for appropriate corrective actions
Drive proof-of-concept testing and feasibility assessment for new application areas
Develop and maintain test programs for custom and commercial battery testers
Develop and implement validation methods to ensure the integrity of test data
Select and manage 3rd party testing vendors
Analyze and interpret data, prepare test reports, and present results
Maintain cell test database
Create and maintain test procedure documentation
Perform test equipment maintenance
Work with Engineering and Quality Assurance teams to create QC protocols
Apply safe working practices in an environment with high voltage, chemicals, and electrochemical test systems
Job Requirements:
Education: BS, MS, PhD, or equivalent, in materials science, chemical engineering or related field
5+ years hands-on experience in battery development, characterization and/or testing
Good working understanding of, and hands-on experience with, typical battery characterization techniques
Ability to design, build and troubleshoot test setups (mechanical, electrical, fluid, thermal, etc.)
Strong analytical and problem-solving skills
Ability to design and conduct complex experiments
Basic knowledge of DOE approaches for performance optimization
Experience implementing root cause and corrective action methodologies
Excellent oral and written communication skills and the ability to function as a team player in a cross-functional environment
Experience in statistical analysis techniques and facility with JMP or similar commercial software
Ability to travel in the U.S. and internationally if needed
Ability to work under pressure in a fast-paced, evolving, small startup company environment
Strong computer skills including Microsoft Office and databases
Preferred Experience/Skills:
7+ years hands-on experience in battery characterization and/or testing
Hands-on experience with Nickel, Zinc, or alkaline-based battery technology
Expertise in life testing of batteries, especially using accelerated techniques
Experience with materials characterization techniques
Strong background in electrochemistry
Relevant product or industry-specific experience such as in battery backup or uninterruptible power supplies
Facility with Python, Matlab or other scripting language for data manipulation
Exposure to quality inspection, auditing, and testing of electro-mechanical battery products
Key Competencies:
Attention to detail
Communication skills - verbal and written
Data collection and analysis
Problem-solving
Planning and organizing
Sound engineering/scientific judgment
Solid decision-making
Customer service oriented
Teamwork
Physical Requirements and working conditions:
Work involves sitting, walking, and lifting up to 40 pounds
Domestic and international travel by car, airplane, bus & train
Requires close visual acuity, the ability to distinguish color, and the ability to hear in
Warehouse and office environments
Salary offers will depend on factors that include the location you work from, your level, education, training, specific skills, years of experience and comparison to other employees already in this role.
In addition, the successful candidate for this position will become eligible for a comprehensive set of outstanding benefits, including medical, dental, vision, life insurance, 401k, paid sick time, paid time off for vacation, paid holidays, paid community service days, professional/personal learning program, and applicable state/federal paid family leave.
ZincFive is committed to employing a diverse workforce. As an Equal Opportunity and Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status. We maintain a safe workplace and perform pre-employment testing. ZincFive is a participant in E-Verify and receives employment authorization of new hires through Social Security and the Department of Homeland Security databases.
Feb 23, 2023
Full time
The Battery Engineer will be a key contributor to the Engineering team, responsible for performing and coordinating electrical, mechanical, and thermal testing, as well as electrochemical characterization, of our NiZn batteries. The Battery Engineer will be responsible for characterizing cell and system performance, developing and implementing accelerated testing approaches, and using statistical analysis tools to correlate experimental results with variations in cell/system parameters. The successful candidate will be a hands-on, resourceful problem-solver, and a consummate team player with excellent communication skills. Emphasis will be placed on experience in the development of battery technology, battery characterization techniques and/or accelerated test protocols for lifetime prediction. This position will be worked onsite at our headquarters in Tualatin, Oregon.
Battery Engineer Job Duties:
Develop and implement accelerated test protocols to characterize and improve performance and lifetime, at the cell, pack, and system level
Use design-of-experiment (DOE) approaches to aid in optimizing cell and system design
Improve system performance by executing root cause failure analysis and providing recommendations for appropriate corrective actions
Drive proof-of-concept testing and feasibility assessment for new application areas
Develop and maintain test programs for custom and commercial battery testers
Develop and implement validation methods to ensure the integrity of test data
Select and manage 3rd party testing vendors
Analyze and interpret data, prepare test reports, and present results
Maintain cell test database
Create and maintain test procedure documentation
Perform test equipment maintenance
Work with Engineering and Quality Assurance teams to create QC protocols
Apply safe working practices in an environment with high voltage, chemicals, and electrochemical test systems
Job Requirements:
Education: BS, MS, PhD, or equivalent, in materials science, chemical engineering or related field
5+ years hands-on experience in battery development, characterization and/or testing
Good working understanding of, and hands-on experience with, typical battery characterization techniques
Ability to design, build and troubleshoot test setups (mechanical, electrical, fluid, thermal, etc.)
Strong analytical and problem-solving skills
Ability to design and conduct complex experiments
Basic knowledge of DOE approaches for performance optimization
Experience implementing root cause and corrective action methodologies
Excellent oral and written communication skills and the ability to function as a team player in a cross-functional environment
Experience in statistical analysis techniques and facility with JMP or similar commercial software
Ability to travel in the U.S. and internationally if needed
Ability to work under pressure in a fast-paced, evolving, small startup company environment
Strong computer skills including Microsoft Office and databases
Preferred Experience/Skills:
7+ years hands-on experience in battery characterization and/or testing
Hands-on experience with Nickel, Zinc, or alkaline-based battery technology
Expertise in life testing of batteries, especially using accelerated techniques
Experience with materials characterization techniques
Strong background in electrochemistry
Relevant product or industry-specific experience such as in battery backup or uninterruptible power supplies
Facility with Python, Matlab or other scripting language for data manipulation
Exposure to quality inspection, auditing, and testing of electro-mechanical battery products
Key Competencies:
Attention to detail
Communication skills - verbal and written
Data collection and analysis
Problem-solving
Planning and organizing
Sound engineering/scientific judgment
Solid decision-making
Customer service oriented
Teamwork
Physical Requirements and working conditions:
Work involves sitting, walking, and lifting up to 40 pounds
Domestic and international travel by car, airplane, bus & train
Requires close visual acuity, the ability to distinguish color, and the ability to hear in
Warehouse and office environments
Salary offers will depend on factors that include the location you work from, your level, education, training, specific skills, years of experience and comparison to other employees already in this role.
In addition, the successful candidate for this position will become eligible for a comprehensive set of outstanding benefits, including medical, dental, vision, life insurance, 401k, paid sick time, paid time off for vacation, paid holidays, paid community service days, professional/personal learning program, and applicable state/federal paid family leave.
ZincFive is committed to employing a diverse workforce. As an Equal Opportunity and Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status. We maintain a safe workplace and perform pre-employment testing. ZincFive is a participant in E-Verify and receives employment authorization of new hires through Social Security and the Department of Homeland Security databases.
Job Summary
Clark County Public Works is currently seeking a Civil Engineer to join its Engineering and Design Section, one of five groups that make up its Engineering and Construction Division. Although Clark County Public Works has the resources and expertise of a large organization, the smaller Engineering and Design Section has the intimate, tight-knit feel of a small firm.
The 10-person team is production oriented. Our engineers design county infrastructure and also have opportunities for career development through planning, project development, emergency response assistance and other interesting and challenging work.
Qualifications
Education and Experience:
Engineer I:
S. degree in Civil or related engineering. ; OR
High School Diploma or G.E.D. and two (2) years relative engineering work experience and possession of an E.I.T. certification.
Engineer II:
S. degree in Civil or related Engineering and two (2) years experience in an Engineering I classification or equivalent.; OR
High School diploma or G.E.D. and four (4) years relative engineering work experience to include a minimum of two (2) years experience in an Engineering I classification or equivalent and possession of an E.I.T. certification.
Engineer III:
S. degree in Civil or related engineering and two (2) years of experience in an Engineer II or equivalent position and registration as a professional civil or structural engineer; AND
Possess or be able to obtain a valid driver's license by date of appointment.
Knowledge of: Principles and practices of civil engineering and of the physical sciences (hydraulics, mechanics, etc.) involved; modern and efficient engineering methods and techniques in the design, construction and maintenance of facilities relative to one or more areas of Public Works engineering (e.g. Transportation, Design, Utility, Construction, etc.); project management, including planning, scheduling, monitoring, and problem solving; Knowledge of the application and interpretation of County regulatory codes, state regulatory and legislative requirements, court decisions and Attorney Generals opinions concerning the wide variety of engineering functions; departmental policies and procedures, work standards and codes applicable to the job.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade: Local 17 Engineers.213 $38.26 - $48.92- per hour
Jan 23, 2023
Full time
Job Summary
Clark County Public Works is currently seeking a Civil Engineer to join its Engineering and Design Section, one of five groups that make up its Engineering and Construction Division. Although Clark County Public Works has the resources and expertise of a large organization, the smaller Engineering and Design Section has the intimate, tight-knit feel of a small firm.
The 10-person team is production oriented. Our engineers design county infrastructure and also have opportunities for career development through planning, project development, emergency response assistance and other interesting and challenging work.
Qualifications
Education and Experience:
Engineer I:
S. degree in Civil or related engineering. ; OR
High School Diploma or G.E.D. and two (2) years relative engineering work experience and possession of an E.I.T. certification.
Engineer II:
S. degree in Civil or related Engineering and two (2) years experience in an Engineering I classification or equivalent.; OR
High School diploma or G.E.D. and four (4) years relative engineering work experience to include a minimum of two (2) years experience in an Engineering I classification or equivalent and possession of an E.I.T. certification.
Engineer III:
S. degree in Civil or related engineering and two (2) years of experience in an Engineer II or equivalent position and registration as a professional civil or structural engineer; AND
Possess or be able to obtain a valid driver's license by date of appointment.
Knowledge of: Principles and practices of civil engineering and of the physical sciences (hydraulics, mechanics, etc.) involved; modern and efficient engineering methods and techniques in the design, construction and maintenance of facilities relative to one or more areas of Public Works engineering (e.g. Transportation, Design, Utility, Construction, etc.); project management, including planning, scheduling, monitoring, and problem solving; Knowledge of the application and interpretation of County regulatory codes, state regulatory and legislative requirements, court decisions and Attorney Generals opinions concerning the wide variety of engineering functions; departmental policies and procedures, work standards and codes applicable to the job.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade: Local 17 Engineers.213 $38.26 - $48.92- per hour
City of Hendersonville
Hendersonville, North Carolina
Fleet Technician I
Full Time
Salary Range: $37,934.12
Hiring Bonus : $4,000 for candidates hired on or after July 1, 2022. Distribution schedule: 1/3 upon completion of the hiring process. 1/3 upon successful completion of 6-month review (meets or exceeds expectations). 1/3 upon successful completion of 1-year review (meets or exceeds expectations). $1,000 referral bonus provided to referring employee if applicable.
Job Description:
Responsible for performing work evaluating, servicing, maintaining, and repairing City vehicles and equipment.
An employee in this class performs as an entry level technician within the City’s garage. Emphasis is placed on timely, reliable, efficient, and effective repairs while ensuring services provided meet department and industry standards. The employee conducts preventive maintenance and repairs on automotive, light and heavy equipment. Work includes the repair of gasoline and diesel engines, motors, brakes, electrical and hydraulic systems, and tires. Employees exercise judgement in diagnosing malfunctions of vehicles and equipment and determining necessary repairs. Employees are subject to hazards of automotive mechanics including working in both inside and outside environments, and exposure to various hazards such as noise, vibrations, moving mechanical parts, electrical currents, dusts, mists, fumes, odors, and oil. Work is performed under the general supervision of the Fleet Shop Forman and is evaluated on attainment of individual and department performance objectives, in compliance with safety requirements, visual inspections and positive feedback from other City staff.
ESSENTIAL JOB FUNCTIONS
Participates in repairs and replacement work, diagnostics, component fabrication and installation, quality control, and inspections.
Applies knowledge of mechanical, hydraulic, and electrical operating systems found in equipment and vehicles.
Follows OSHA safety and divisional policies and procedures.
Assists with reports on equipment maintenance and replacement of parts.
Responds to road calls to determine the ability to service vehicles on site; participates in vehicle towing when necessary.
Maintains accurate and recent records, provides analysis and recommendations to correct abnormal findings.
Performs other related job duties as assigned.
QUALIFICATIONS
Education and Experience:
High school diploma; and one (1) year of experience in automotive mechanics including the repair and maintenance of trucks, cars, backhoes, ditch diggers, and heavy-duty equipment such as tractors and large gasoline and diesel trucks and fire and police apparatus and experience in supervision; or an equivalent combination of education and experience.
Special Qualifications:
Possession of a valid Class B Driver’s License to operate a motor vehicle. Requirement exists at the time of hire and as a condition of continued employment.
Knowledge, Skills and Abilities:
Knowledge of the theory and processes of mechanical and hydraulic principles, motors, pumps, equipment, and materials used automotive equipment.
Knowledge of the repair and maintenance of automotive, construction and specialty equipment and related terminology.
Knowledge of the occupational hazards and safety precautions of the work.
Knowledge of the methods, tools, and equipment used in the repair of automotive passenger cars, trucks, construction, and maintenance equipment such as drills, presses, lathes, grinders, micrometers, and brake relining and drum grinding machines.
Knowledge of OSHA rules and regulations as they apply to Fleet Maintenance.
Knowledge of computer technology.
Skills in the use and operation of tools and machinery in equipment repair work.
Ability to establish and maintain effective working relationships with coworkers, supervisors, department personnel, and vendors.
Ability to operate complex diagnostic and testing equipment and use test results to determine mechanical problems.
Ability to develop and maintain accurate records of repairs and service operations.
Ability to interpret schematics, diagrams, and installation and repair charts and apply information to the work performed.
Ability to follow oral and written instructions.
Ability to obtain A/C 609 certification within first month of employment.
Ability to obtain NC Inspection License with the first six months.
Ability to obtain G1 (Maintenance and Light Repair) test within the first six months.
Ability to work on small engines.
PHYSICAL DEMANDS
Work in this classification is defined as heavy work requiring the physical exertion of in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds frequently, and/or in excess of 20 pounds of force constantly to move objects. Work requires climbing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, handling and repetitive motions. Work requires dexterity in the hands for typing and operation of standard office equipment and visual acuity is necessary to read handwritten and typewritten materials and to operate a computer terminal. Vocal communication is required to express or exchange ideas. Hearing is required to perceive information at normal spoken word levels. Visual acuity is required for depth perception, preparing and analyzing written or computer data, visual inspection of products, operation of machines, determining the accuracy and thoroughness of work, and observing general surroundings and activities. Employee must also have the visual acuity to operate motor vehicles and use machines such as hoists, lifts, and perform semi-skilled tasks of a non-repetitive in support of trades’ personnel.
WORK ENVIRONMENT
Work is primarily performed in both inside and outside environmental conditions including extreme heat and cold. Employee is subject to noise which requires the worker to shout in order to be heard above the ambient noise level or other noises created in a vehicle maintenance facility. Employee is subject to vibration such as oscillating movements of the extremities or whole body and is subject to workplace hazards including mechanical equipment and atmospheric conditions due to exposure to acetylene torches, fumes, odors, dusts, hot metal exhausts, and fuels, greases, and oils. Employee may work in close quarters, crawl spaces, under or on top of large vehicles, and other areas which could cause claustrophobia or dizziness from heights.
Dec 01, 2022
Full time
Fleet Technician I
Full Time
Salary Range: $37,934.12
Hiring Bonus : $4,000 for candidates hired on or after July 1, 2022. Distribution schedule: 1/3 upon completion of the hiring process. 1/3 upon successful completion of 6-month review (meets or exceeds expectations). 1/3 upon successful completion of 1-year review (meets or exceeds expectations). $1,000 referral bonus provided to referring employee if applicable.
Job Description:
Responsible for performing work evaluating, servicing, maintaining, and repairing City vehicles and equipment.
An employee in this class performs as an entry level technician within the City’s garage. Emphasis is placed on timely, reliable, efficient, and effective repairs while ensuring services provided meet department and industry standards. The employee conducts preventive maintenance and repairs on automotive, light and heavy equipment. Work includes the repair of gasoline and diesel engines, motors, brakes, electrical and hydraulic systems, and tires. Employees exercise judgement in diagnosing malfunctions of vehicles and equipment and determining necessary repairs. Employees are subject to hazards of automotive mechanics including working in both inside and outside environments, and exposure to various hazards such as noise, vibrations, moving mechanical parts, electrical currents, dusts, mists, fumes, odors, and oil. Work is performed under the general supervision of the Fleet Shop Forman and is evaluated on attainment of individual and department performance objectives, in compliance with safety requirements, visual inspections and positive feedback from other City staff.
ESSENTIAL JOB FUNCTIONS
Participates in repairs and replacement work, diagnostics, component fabrication and installation, quality control, and inspections.
Applies knowledge of mechanical, hydraulic, and electrical operating systems found in equipment and vehicles.
Follows OSHA safety and divisional policies and procedures.
Assists with reports on equipment maintenance and replacement of parts.
Responds to road calls to determine the ability to service vehicles on site; participates in vehicle towing when necessary.
Maintains accurate and recent records, provides analysis and recommendations to correct abnormal findings.
Performs other related job duties as assigned.
QUALIFICATIONS
Education and Experience:
High school diploma; and one (1) year of experience in automotive mechanics including the repair and maintenance of trucks, cars, backhoes, ditch diggers, and heavy-duty equipment such as tractors and large gasoline and diesel trucks and fire and police apparatus and experience in supervision; or an equivalent combination of education and experience.
Special Qualifications:
Possession of a valid Class B Driver’s License to operate a motor vehicle. Requirement exists at the time of hire and as a condition of continued employment.
Knowledge, Skills and Abilities:
Knowledge of the theory and processes of mechanical and hydraulic principles, motors, pumps, equipment, and materials used automotive equipment.
Knowledge of the repair and maintenance of automotive, construction and specialty equipment and related terminology.
Knowledge of the occupational hazards and safety precautions of the work.
Knowledge of the methods, tools, and equipment used in the repair of automotive passenger cars, trucks, construction, and maintenance equipment such as drills, presses, lathes, grinders, micrometers, and brake relining and drum grinding machines.
Knowledge of OSHA rules and regulations as they apply to Fleet Maintenance.
Knowledge of computer technology.
Skills in the use and operation of tools and machinery in equipment repair work.
Ability to establish and maintain effective working relationships with coworkers, supervisors, department personnel, and vendors.
Ability to operate complex diagnostic and testing equipment and use test results to determine mechanical problems.
Ability to develop and maintain accurate records of repairs and service operations.
Ability to interpret schematics, diagrams, and installation and repair charts and apply information to the work performed.
Ability to follow oral and written instructions.
Ability to obtain A/C 609 certification within first month of employment.
Ability to obtain NC Inspection License with the first six months.
Ability to obtain G1 (Maintenance and Light Repair) test within the first six months.
Ability to work on small engines.
PHYSICAL DEMANDS
Work in this classification is defined as heavy work requiring the physical exertion of in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds frequently, and/or in excess of 20 pounds of force constantly to move objects. Work requires climbing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, handling and repetitive motions. Work requires dexterity in the hands for typing and operation of standard office equipment and visual acuity is necessary to read handwritten and typewritten materials and to operate a computer terminal. Vocal communication is required to express or exchange ideas. Hearing is required to perceive information at normal spoken word levels. Visual acuity is required for depth perception, preparing and analyzing written or computer data, visual inspection of products, operation of machines, determining the accuracy and thoroughness of work, and observing general surroundings and activities. Employee must also have the visual acuity to operate motor vehicles and use machines such as hoists, lifts, and perform semi-skilled tasks of a non-repetitive in support of trades’ personnel.
WORK ENVIRONMENT
Work is primarily performed in both inside and outside environmental conditions including extreme heat and cold. Employee is subject to noise which requires the worker to shout in order to be heard above the ambient noise level or other noises created in a vehicle maintenance facility. Employee is subject to vibration such as oscillating movements of the extremities or whole body and is subject to workplace hazards including mechanical equipment and atmospheric conditions due to exposure to acetylene torches, fumes, odors, dusts, hot metal exhausts, and fuels, greases, and oils. Employee may work in close quarters, crawl spaces, under or on top of large vehicles, and other areas which could cause claustrophobia or dizziness from heights.
Technical Designer
Museum of Science, Boston
www.mos.org
Innovation and creativity come from the unique perspectives of a diverse staff. We value your perspective.
SUMMARY STATEMENT:
The Exhibit Technical Designers are the Museum's "Makers" or exhibit engineers, responsible for designing, fabricating, and troubleshooting interactive and technical exhibit components. The Technical Designer is cross disciplinary creator, that may have a particular field or specialty ranging from mechanical to electronic design, but always works with a high level of craft and detail. Working as part of exhibition team throughout the entire exhibit development process: creating and revising prototypes, fabricating and installing final exhibit components that meet the educational goals, provides a safe experience for staff and visitors, and are maintainable for the life of the exhibition. The technical designer works on multiple projects at once, both alone and within teams, to implement both their own designs and those given to them, always ensuring a high quality of work.
RESPONSIBILITIES:
1-3 major new permanent and temporary exhibit projects per year, incorporating 5 - 25 interactive exhibit components each and a total budget of $1,000,000 - $2,000,000
Provides technical expertise to 3-4 exhibit project teams per year
6-12 small new exhibit projects per year incorporating several interactive or technical components each, including documentation
Fabricates 20-30 exhibit components and component pieces, including machining, model making and scenic work
Fields dozens of fabrication and troubleshooting assistance requests from departments throughout the museum as directed
WORK SCHEDULE:
This position is full-time, Monday - Friday, 40 hrs / week
REPORTS TO:
Sr. Director, Exhibits
MINIMUM QUALIFICATIONS:
Post high school course work, technical degree, associate's degree, business or vocational certificate.
3 or more years of design, fabrication, and repair of mechanical, electrical, or electromechanical systems experience.
Familiarity with designing, fabricating, or troubleshooting: mechanical systems, hydraulics, pneumatics, electronics and electromechanical systems.
Ability to understand and interpret design drawings and schematics.
Familiarity with fabrication and installation skills, including; building objects made of wood, metals, plastics, and composites.
Ability to collaborate closely with project teams, and also work independently, when required.
Ability to learn, understand and follow written and verbal instructions, procedures, new skills, processes, and safety requirements.
STARTING SALARY:
Non-Exempt (Hourly). $26.84 - $28.84 / hr
BENEFITS:
Benefits for full-time, non-exempt (hourly) staff include: free parking, T accessibility, commuter spending account, 15 vacation days, 12 holidays, 10 sick days, medical, dental, and vision insurance, short- and long-term disability, life insurance, retirement and savings plan, health care/dependent care flex spending plan, a Museum membership, employee discounts, employee referral program, tuition assistance, professional development, direct deposit, free admission, free Duck Tours, discounted movie passes, and much more!
VACCINATION POLICY:
Staff, interns, and volunteers will be required to show proof that they are fully vaccinated against COVID-19 as a condition of employment. The Museum will consider an exemption from the vaccine requirement if they are unable to get vaccinated due to a qualifying medical disability or a sincerely held religious objection. The Museum is not required to provide an accommodation or exemption from the vaccine requirement if doing so would pose a direct threat to others in the workplace or would create an undue hardship for the Museum.
The Museum of Science is fully committed to Equal Employment Opportunity and to attracting, retaining, developing and promoting the most qualified employees without regard to their race, gender, color, religion, sexual orientation, national origin, age, physical or mental disability, citizenship status, veteran status, or any other characteristic prohibited by federal, state or local law. We are dedicated to providing a work environment free from discrimination and harassment, and where employees are treated with respect and dignity.
No phone inquiries, please. Qualified applicants will be contacted within two to four weeks of initial application.
Apr 22, 2022
Full time
Technical Designer
Museum of Science, Boston
www.mos.org
Innovation and creativity come from the unique perspectives of a diverse staff. We value your perspective.
SUMMARY STATEMENT:
The Exhibit Technical Designers are the Museum's "Makers" or exhibit engineers, responsible for designing, fabricating, and troubleshooting interactive and technical exhibit components. The Technical Designer is cross disciplinary creator, that may have a particular field or specialty ranging from mechanical to electronic design, but always works with a high level of craft and detail. Working as part of exhibition team throughout the entire exhibit development process: creating and revising prototypes, fabricating and installing final exhibit components that meet the educational goals, provides a safe experience for staff and visitors, and are maintainable for the life of the exhibition. The technical designer works on multiple projects at once, both alone and within teams, to implement both their own designs and those given to them, always ensuring a high quality of work.
RESPONSIBILITIES:
1-3 major new permanent and temporary exhibit projects per year, incorporating 5 - 25 interactive exhibit components each and a total budget of $1,000,000 - $2,000,000
Provides technical expertise to 3-4 exhibit project teams per year
6-12 small new exhibit projects per year incorporating several interactive or technical components each, including documentation
Fabricates 20-30 exhibit components and component pieces, including machining, model making and scenic work
Fields dozens of fabrication and troubleshooting assistance requests from departments throughout the museum as directed
WORK SCHEDULE:
This position is full-time, Monday - Friday, 40 hrs / week
REPORTS TO:
Sr. Director, Exhibits
MINIMUM QUALIFICATIONS:
Post high school course work, technical degree, associate's degree, business or vocational certificate.
3 or more years of design, fabrication, and repair of mechanical, electrical, or electromechanical systems experience.
Familiarity with designing, fabricating, or troubleshooting: mechanical systems, hydraulics, pneumatics, electronics and electromechanical systems.
Ability to understand and interpret design drawings and schematics.
Familiarity with fabrication and installation skills, including; building objects made of wood, metals, plastics, and composites.
Ability to collaborate closely with project teams, and also work independently, when required.
Ability to learn, understand and follow written and verbal instructions, procedures, new skills, processes, and safety requirements.
STARTING SALARY:
Non-Exempt (Hourly). $26.84 - $28.84 / hr
BENEFITS:
Benefits for full-time, non-exempt (hourly) staff include: free parking, T accessibility, commuter spending account, 15 vacation days, 12 holidays, 10 sick days, medical, dental, and vision insurance, short- and long-term disability, life insurance, retirement and savings plan, health care/dependent care flex spending plan, a Museum membership, employee discounts, employee referral program, tuition assistance, professional development, direct deposit, free admission, free Duck Tours, discounted movie passes, and much more!
VACCINATION POLICY:
Staff, interns, and volunteers will be required to show proof that they are fully vaccinated against COVID-19 as a condition of employment. The Museum will consider an exemption from the vaccine requirement if they are unable to get vaccinated due to a qualifying medical disability or a sincerely held religious objection. The Museum is not required to provide an accommodation or exemption from the vaccine requirement if doing so would pose a direct threat to others in the workplace or would create an undue hardship for the Museum.
The Museum of Science is fully committed to Equal Employment Opportunity and to attracting, retaining, developing and promoting the most qualified employees without regard to their race, gender, color, religion, sexual orientation, national origin, age, physical or mental disability, citizenship status, veteran status, or any other characteristic prohibited by federal, state or local law. We are dedicated to providing a work environment free from discrimination and harassment, and where employees are treated with respect and dignity.
No phone inquiries, please. Qualified applicants will be contacted within two to four weeks of initial application.
Job Summary
Clark County Public Works is currently seeking a Civil Engineer to join its Engineering and Design Section, one of five groups that make up its Engineering and Construction Division. Although Clark County Public Works has the resources and expertise of a large organization, the resources and expertise of a large organization, the smaller Engineering and Design Section has the intimate, tight-knit feel of a small firm.
The 10-person team is production oriented. Our engineers design county infrastructure and also have opportunities for career development through planning, project development, emergency response assistance and other interesting and challenging work.
Qualifications:
Engineer I:
B.S. degree in Civil or related engineering. ; OR
High School Diploma or G.E.D. and two (2) years relative engineering work experience and possession of an E.I.T. certification.
Engineer II:
B.S. degree in Civil or related Engineering and two (2) years experience in an Engineering I classification or equivalent.; OR
High School diploma or G.E.D. and four (4) years relative engineering work experience to include a minimum of two (2) years experience in an Engineering I classification or equivalent and possession of an E.I.T. certification.
Engineer III:
B.S. degree in Civil or related engineering and two (2) years of experience in an Engineer II or equivalent position and registration as a professional civil or structural engineer; AND
Possess or be able to obtain a valid driver's license by date of appointment.
Knowledge of: Principles and practices of civil engineering and of the physical sciences (hydraulics, mechanics, etc.) involved; modern and efficient engineering methods and techniques in the design, construction and maintenance of facilities relative to one or more areas of Public Works engineering (e.g. Transportation, Design, Utility, Construction, etc.); project management, including planning, scheduling, monitoring, and problem solving; Knowledge of the application and interpretation of County regulatory codes, state regulatory and legislative requirements, court decisions and Attorney Generals opinions concerning the wide variety of engineering functions; departmental policies and procedures, work standards and codes applicable to the job.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade
Local 17 Engineers.213 ($36.70 - $46.93) per hour
Apr 18, 2022
Part time
Job Summary
Clark County Public Works is currently seeking a Civil Engineer to join its Engineering and Design Section, one of five groups that make up its Engineering and Construction Division. Although Clark County Public Works has the resources and expertise of a large organization, the resources and expertise of a large organization, the smaller Engineering and Design Section has the intimate, tight-knit feel of a small firm.
The 10-person team is production oriented. Our engineers design county infrastructure and also have opportunities for career development through planning, project development, emergency response assistance and other interesting and challenging work.
Qualifications:
Engineer I:
B.S. degree in Civil or related engineering. ; OR
High School Diploma or G.E.D. and two (2) years relative engineering work experience and possession of an E.I.T. certification.
Engineer II:
B.S. degree in Civil or related Engineering and two (2) years experience in an Engineering I classification or equivalent.; OR
High School diploma or G.E.D. and four (4) years relative engineering work experience to include a minimum of two (2) years experience in an Engineering I classification or equivalent and possession of an E.I.T. certification.
Engineer III:
B.S. degree in Civil or related engineering and two (2) years of experience in an Engineer II or equivalent position and registration as a professional civil or structural engineer; AND
Possess or be able to obtain a valid driver's license by date of appointment.
Knowledge of: Principles and practices of civil engineering and of the physical sciences (hydraulics, mechanics, etc.) involved; modern and efficient engineering methods and techniques in the design, construction and maintenance of facilities relative to one or more areas of Public Works engineering (e.g. Transportation, Design, Utility, Construction, etc.); project management, including planning, scheduling, monitoring, and problem solving; Knowledge of the application and interpretation of County regulatory codes, state regulatory and legislative requirements, court decisions and Attorney Generals opinions concerning the wide variety of engineering functions; departmental policies and procedures, work standards and codes applicable to the job.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade
Local 17 Engineers.213 ($36.70 - $46.93) per hour
Job Summary
This position diagnoses problems and makes mechanical repairs to all types of equipment used in roadway and parts maintenance and performs vehicular maintenance for all county departments. The Technician at times will be working in the field three or more hours per shift servicing equipment. This is a journey level position requiring experience in welding and fabrication, maintaining gas and diesel truck engines, and hydraulically operated equipment. Major duties include: inspecting, diagnosing, and making repairs to road construction and grounds maintenance equipment and automotive fleet; and designing, modifying, repairing, and installing hydraulic systems and components.
Qualifications
Education and Experience:
Three (3) years of experience as a journey level equipment/vehicle Technician Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience. Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable.
Must possess a valid motor vehicle operator’s license.
Must possess or be able to obtain a Commercial Drivers License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire.
Experience in welding and fabrication is highly desirable.
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade: Local 1432.177 ($29.25 - $33.20) per hour
Jan 18, 2022
Full time
Job Summary
This position diagnoses problems and makes mechanical repairs to all types of equipment used in roadway and parts maintenance and performs vehicular maintenance for all county departments. The Technician at times will be working in the field three or more hours per shift servicing equipment. This is a journey level position requiring experience in welding and fabrication, maintaining gas and diesel truck engines, and hydraulically operated equipment. Major duties include: inspecting, diagnosing, and making repairs to road construction and grounds maintenance equipment and automotive fleet; and designing, modifying, repairing, and installing hydraulic systems and components.
Qualifications
Education and Experience:
Three (3) years of experience as a journey level equipment/vehicle Technician Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience. Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable.
Must possess a valid motor vehicle operator’s license.
Must possess or be able to obtain a Commercial Drivers License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire.
Experience in welding and fabrication is highly desirable.
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade: Local 1432.177 ($29.25 - $33.20) per hour
General Requirements
· Must continually be able to lift and handle heavy loads up to 70 lbs.
· Must have good eyesight (correctable to 20/20) and normal hearing for diagnostics and troubleshooting equipment two stroke and four stroke
· Must have Stihl Bronze certification
· Must Have Briggs and Stratton dealer certification.
· Basic knowledge of four and two stroke equipment
· Basic knowledge of electrical low voltage systems 12v and 24v
· Basic knowledge of all kinds of garden equipment Zero turn mowers, blowers, generators, trimmers. Pressure washers, basically all power equipment.
Target Responsibilities:
· Repair and maintain small engines, large lawn equipment, mowers, tillers, and other related vehicles and equipment.
· Responsibilities include diagnosing small engine problems, maintaining shop area cleanliness, and collecting and disposing of trash.
· Clearly explain (if called upon) to the customer’s satisfaction the diagnosis and repair of the machine in question.
· Continually seek both technical and product training when available.
· Demonstrate accuracy and thoroughness, improve and promote quality, and monitor own work to ensure quality
· Observe all safety and security procedures, report potentially unsafe conditions, and use equipment and materials properly.
· Treat management and other employees with respect and contribute to building a positive team spirit.
· Follow instructions and promptly respond to management direction.
· Work with integrity, always upholding company values.
· Perform related responsibilities/accountabilities as required or directed.
Daily Duties and Responsibilities:
· Begin each workday with a positive attitude by encouraging yourself to meet the daily and weekly goals. Work to develop a sense of “team” in the service department and across other departments.
· Repair or overhaul small engines and related mechanical or structural parts for a variety of equipment types.
· Perform repairs within the time parameters as established by flat rate time or billed time with proper diagnosis
· Maintain an orderly and clean work area. Also assist in keeping the entire shop orderly and clean.
· Collect and dispose of trash.
· Establish and maintain a positive working relationship with employees, vendors and customers
· Respond promptly to customer needs and manage difficult customer situations
· Completely fill out and turn in all work orders.
Weekly Duties and Responsibilities:
· Study and review all relevant product repair updates
· Inspect, clean and maintain all equipment used
· Report any faulty equipment or hazards to the shop supervisor Meet with supervisor to discuss the weekly repair trends, comebacks and service problems'
Nov 21, 2021
Full time
General Requirements
· Must continually be able to lift and handle heavy loads up to 70 lbs.
· Must have good eyesight (correctable to 20/20) and normal hearing for diagnostics and troubleshooting equipment two stroke and four stroke
· Must have Stihl Bronze certification
· Must Have Briggs and Stratton dealer certification.
· Basic knowledge of four and two stroke equipment
· Basic knowledge of electrical low voltage systems 12v and 24v
· Basic knowledge of all kinds of garden equipment Zero turn mowers, blowers, generators, trimmers. Pressure washers, basically all power equipment.
Target Responsibilities:
· Repair and maintain small engines, large lawn equipment, mowers, tillers, and other related vehicles and equipment.
· Responsibilities include diagnosing small engine problems, maintaining shop area cleanliness, and collecting and disposing of trash.
· Clearly explain (if called upon) to the customer’s satisfaction the diagnosis and repair of the machine in question.
· Continually seek both technical and product training when available.
· Demonstrate accuracy and thoroughness, improve and promote quality, and monitor own work to ensure quality
· Observe all safety and security procedures, report potentially unsafe conditions, and use equipment and materials properly.
· Treat management and other employees with respect and contribute to building a positive team spirit.
· Follow instructions and promptly respond to management direction.
· Work with integrity, always upholding company values.
· Perform related responsibilities/accountabilities as required or directed.
Daily Duties and Responsibilities:
· Begin each workday with a positive attitude by encouraging yourself to meet the daily and weekly goals. Work to develop a sense of “team” in the service department and across other departments.
· Repair or overhaul small engines and related mechanical or structural parts for a variety of equipment types.
· Perform repairs within the time parameters as established by flat rate time or billed time with proper diagnosis
· Maintain an orderly and clean work area. Also assist in keeping the entire shop orderly and clean.
· Collect and dispose of trash.
· Establish and maintain a positive working relationship with employees, vendors and customers
· Respond promptly to customer needs and manage difficult customer situations
· Completely fill out and turn in all work orders.
Weekly Duties and Responsibilities:
· Study and review all relevant product repair updates
· Inspect, clean and maintain all equipment used
· Report any faulty equipment or hazards to the shop supervisor Meet with supervisor to discuss the weekly repair trends, comebacks and service problems'
Interstate Supplies and Services
511 Union West Blvd, Stallings, NC, 28104
General Requirements
· Must continually be able to lift and handle heavy loads up to 70 lbs.
· Must have good eyesight (correctable to 20/20) and normal hearing for diagnostics and troubleshooting equipment two stroke and four stroke
· Must have Stihl Bronze certification
· Must Have Briggs and Stratton dealer certification.
· Basic knowledge of four and two stroke equipment
· Basic knowledge of electrical low voltage systems 12v and 24v
· Basic knowledge of all kinds of garden equipment Zero turn mowers, blowers, generators, trimmers. Pressure washers, basically all power equipment.
Target Responsibilities:
· Repair and maintain small engines, large lawn equipment, mowers, tillers, and other related vehicles and equipment.
· Responsibilities include diagnosing small engine problems, maintaining shop area cleanliness, and collecting and disposing of trash.
· Clearly explain (if called upon) to the customer’s satisfaction the diagnosis and repair of the machine in question.
· Continually seek both technical and product training when available.
· Demonstrate accuracy and thoroughness, improve and promote quality, and monitor own work to ensure quality
· Observe all safety and security procedures, report potentially unsafe conditions, and use equipment and materials properly.
· Treat management and other employees with respect and contribute to building a positive team spirit.
· Follow instructions and promptly respond to management direction.
· Work with integrity, always upholding company values.
· Perform related responsibilities/accountabilities as required or directed.
Daily Duties and Responsibilities:
· Begin each workday with a positive attitude by encouraging yourself to meet the daily and weekly goals. Work to develop a sense of “team” in the service department and across other departments.
· Repair or overhaul small engines and related mechanical or structural parts for a variety of equipment types.
· Perform repairs within the time parameters as established by flat rate time or billed time with proper diagnosis
· Maintain an orderly and clean work area. Also assist in keeping the entire shop orderly and clean.
· Collect and dispose of trash.
· Establish and maintain a positive working relationship with employees, vendors and customers
· Respond promptly to customer needs and manage difficult customer situations
· Completely fill out and turn in all work orders.
Weekly Duties and Responsibilities:
· Study and review all relevant product repair updates
· Inspect, clean and maintain all equipment used
· Report any faulty equipment or hazards to the shop supervisor Meet with supervisor to discuss the weekly repair trends, comebacks and service problems'
Nov 21, 2021
Full time
General Requirements
· Must continually be able to lift and handle heavy loads up to 70 lbs.
· Must have good eyesight (correctable to 20/20) and normal hearing for diagnostics and troubleshooting equipment two stroke and four stroke
· Must have Stihl Bronze certification
· Must Have Briggs and Stratton dealer certification.
· Basic knowledge of four and two stroke equipment
· Basic knowledge of electrical low voltage systems 12v and 24v
· Basic knowledge of all kinds of garden equipment Zero turn mowers, blowers, generators, trimmers. Pressure washers, basically all power equipment.
Target Responsibilities:
· Repair and maintain small engines, large lawn equipment, mowers, tillers, and other related vehicles and equipment.
· Responsibilities include diagnosing small engine problems, maintaining shop area cleanliness, and collecting and disposing of trash.
· Clearly explain (if called upon) to the customer’s satisfaction the diagnosis and repair of the machine in question.
· Continually seek both technical and product training when available.
· Demonstrate accuracy and thoroughness, improve and promote quality, and monitor own work to ensure quality
· Observe all safety and security procedures, report potentially unsafe conditions, and use equipment and materials properly.
· Treat management and other employees with respect and contribute to building a positive team spirit.
· Follow instructions and promptly respond to management direction.
· Work with integrity, always upholding company values.
· Perform related responsibilities/accountabilities as required or directed.
Daily Duties and Responsibilities:
· Begin each workday with a positive attitude by encouraging yourself to meet the daily and weekly goals. Work to develop a sense of “team” in the service department and across other departments.
· Repair or overhaul small engines and related mechanical or structural parts for a variety of equipment types.
· Perform repairs within the time parameters as established by flat rate time or billed time with proper diagnosis
· Maintain an orderly and clean work area. Also assist in keeping the entire shop orderly and clean.
· Collect and dispose of trash.
· Establish and maintain a positive working relationship with employees, vendors and customers
· Respond promptly to customer needs and manage difficult customer situations
· Completely fill out and turn in all work orders.
Weekly Duties and Responsibilities:
· Study and review all relevant product repair updates
· Inspect, clean and maintain all equipment used
· Report any faulty equipment or hazards to the shop supervisor Meet with supervisor to discuss the weekly repair trends, comebacks and service problems'
Job Summary
Clark County Public Works looks for people who can grow, think, lead and inspire. We seek leaders, achievers and doers who bring skill, passion and commitment to public service.
Are you someone who rolls up their sleeves and jumps in? Are you someone who likes to help others in a manner that exceeds their expectations? Are you someone who enjoys working in a fast-past environment? If so, I invite you to learn more about the Fleet Equipment Technician I position.
As the Equipment Technician I in Fleet Services, you will diagnose problems; make mechanical repairs to all types of equipment used in roadway and parts maintenance and perform vehicular maintenance for all county departments. Other duties will consist of: Designing, modifying, repairing, and installing hydraulic systems and components.
Qualifications
Education and Experience:
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Three (3) years of experience as a journey level equipment/vehicle Technician
Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience
Must possess a valid motor vehicle operator’s license
Must possess or be able to obtain a Commercial Driver’s License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire
Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable
Experience in welding and fabrication is highly desirable
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade: Local 1432.177 ($29.25 - $33.20) per hour
Nov 17, 2021
Full time
Job Summary
Clark County Public Works looks for people who can grow, think, lead and inspire. We seek leaders, achievers and doers who bring skill, passion and commitment to public service.
Are you someone who rolls up their sleeves and jumps in? Are you someone who likes to help others in a manner that exceeds their expectations? Are you someone who enjoys working in a fast-past environment? If so, I invite you to learn more about the Fleet Equipment Technician I position.
As the Equipment Technician I in Fleet Services, you will diagnose problems; make mechanical repairs to all types of equipment used in roadway and parts maintenance and perform vehicular maintenance for all county departments. Other duties will consist of: Designing, modifying, repairing, and installing hydraulic systems and components.
Qualifications
Education and Experience:
Any combination of education, experience, and training that would demonstrate the ability to perform the work will be considered.
Three (3) years of experience as a journey level equipment/vehicle Technician
Certified vocational course work or training relating to repair and maintenance of various fleet equipment may substitute for up to one (1) year of the required experience
Must possess a valid motor vehicle operator’s license
Must possess or be able to obtain a Commercial Driver’s License Class A with air brake and HAZMAT (Hazardous Materials) endorsement and passenger endorsement, within one (1) month of hire
Five (5) years of experience working on diesel truck engines and hydraulically operated equipment is highly desirable
Experience in welding and fabrication is highly desirable
Knowledge of: Gas and diesel truck engines and hydraulically operated equipment; mechanical repair and preventive maintenance.
Ability to: Independently perform major repairs and maintenance on a variety of diesel trucks; read and comprehend service and equipment manuals; operate large and small equipment, motor vehicles, and tools in a safe and efficient manner; work independently in the performance of regular duties; accurately and neatly record and maintain a variety of data.
For complete job announcement, application requirements, and to apply on-line, please visit our website at:
https://www.clark.wa.gov/human-resources/explore-careers-clark-county
Salary Grade: Local 1432.177 ($29.25 - $33.20) per hour